Compare

Tornado CK-14 Vacuum Filter Bags

Packaging

More Info:

Directions:

• Change the paper filter bag frequently if vacuuming fine particles like powder or fine road dust. Some fine particles can restrict airflow very quickly and will decrease performance even before the bag appears to be full.
• Change the filter bag when it becomes 2/3 full.
• While vacuuming fine particles such as power, plaster dust, etc., change bags more frequently.

• The approximate life for these brushes is 300 hours
• The standard brushes are included with the machine
• Part # 1064615 = Cimex 4615, Tornado 90080, Karcher 6.680-002.0

• The approximate life for these brushes is 250 hours
• The bristles are impregnated with 80 grit silicone carbide to give that extra scrubbing bite to any dirty job
• The 4616 brushes are very aggressive and should only be used on aluminum escalators treads
• These brushes are not for use on escalators with a coated surface
• Part # 1066149 = Cimex 4616, Tornado 90081, Karcher 6.680-001.0

Specifications:

• Nylon brush set (2) regular daily maintenance
• Tynex brush set (2) periodic deep cleaning*
• *Tynex brushes are very aggressive, and only suitable for occasional use on aluminium escalators only (Do not use on escalators with a coated surface or powder coating as damage may result.

Directions:

1. Release the two locking pins securing the top cover and raise the cover to rest against the handle.
2. Disconnect the two hoses from the brush cover.
3. Tip the cowl forward to reveal the brush spindles.
4. Remove the brush retaining clips from the spindle ends and slide the brush on to the spindle engaging the narrow slot with the drive nib and refit the retaining clips.
5. Close the brush cowl and reconnect the two hoses.
6. Close the top cover and re-engage the locking pins.

The Unique Cimex 3-Brush System

• 3 brush heads (Planetary drive) rotate giving improved scrubbing efficiency
• Faster coverage of the working area
• System reverses with each action. Bristles reset and sharpen giving prolonged effective life
• Superior safety - because even at high speeds, vibration and torque feed back into the weight of the machine, giving maneuverability, ease of control, and reduced fatigue
• Minimal training required

Features of the Cimex Machine

• Operator is not working against constant "slide" or pull typical of single brush systems, reducing fatigue
• No "bloom" rings or halo effects to mar your floors after polishing
• Thorough carpet cleaning is achieved with a single pass
• No noisy gears, ideal for hospitals, nursing homes, and schools
• Floating brushes provide effective cleaning action of grout lines, slip resistant floor covering, and textured natural stone
• Auto reversing motor extends brush life
• Large capacity tank increases coverage - 6.5 gallon capacity
• Non-clog solution valve gives uninterrupted operation
• Cleaning solution is delivered through the center of the brushes to reduce splashing
• Three brush action for effective cleaning and operator ease
• Central motor gives even brush pressure

Packaging

More Info:

• Cimex R48 Parts List & Manual (pdf)

Carbide Scrapers

• Part #480000 (3 per set)

Carbide Cutter Inserts

• Replacement Carbide cutter inserts. A complete set of carbide cutter inserts for a 19" Cimex requires a total of 27 cutters (9 per disc x 3 discs).
• Part # CARCUT (cutter inserts are sold individually.)
• Designed to fit the Cimex R48 (19" model)