Baseboard Wax Stripper is a ready-to-use, heavy-duty cleaner packaged in an aerosol container. It is designed to remove heavy soils, wax, and floor finish buildup from hard surfaces. It will quickly remove multiple coats of floor finish or wax accumulation from baseboards, coves, stairs, and other hard-to-reach areas.

Removes heavy wax build-up in hard-to-reach areas:

• Floors
• Baseboards
• Ceramic wall tile
• Clinging foam adheres to surfaces
• Easy rinsing

Areas of Use:

Use to remove wax build-up from baseboards, cove molding, vinyl base, VCT floors, and ceramic wall tiles.

• Thick white foam clings to vertical surfaces and resists dripping.
• Aggressive formula penetrates and loosens buildup quickly and thoroughly.
• Powerful – Fast acting foam dissolves multiple layers of soil and build-up.
• Versatile – May be used for a wide variety of applications.
• Rinse-free formula leaves no alkaline residue.
• For use on baseboards, floor edges, corners, stairways, and ceramic tile.
• Convenient aerosol spray can be used in tough-to-reach areas.

Directions:

Shake can well and invert before using. Before using, determine suitability and safety of product on surface to be cleaned. Hold can upside down. Spray wax stripper about 6 to 10 inches from baseboard or floor surface. A thin, even coating should cover the wax and soil.

Do not apply to painted surfaces, immediately wipe off any over spray. Wait 2 to 3 minutes. Then wet scrub the surface using either a brown stripping pad or baseboard scrubbing brush. Rinse surface with water if necessary.