Water Purification System for Window / Solar Cleaning

Description

The best built, most reliable water purification system for the window / solar panel cleaning professional. The Fill n Go system mounts directly to your vehicle or trailer for easy transport. Simply fill the 52 gallon tank ahead of time and head to the jobsite, add additional water as needed. The fill n Fill purifies water – Fast. The on-board pump is powered with a 12 volt battery (sold separately) delivering 90 psi @ 5.3 gpm of water pressure to your waterfed pole or poles with the dual user model.

To make it even better, we’ve included a built-in hose reel with 200 feet of water hose – connect the hose to your pole and clean!

• 52 gallon capacity polyethylene tank
• Powder coated frame
• 12 volt powered pump (battery not included)
• Water pump controller with low voltage cut-off
• 3 – 4 hour run time on a battery charge
• 5.3 gallon per minute output
• Built-in hose reel
• 200 feet of water hose
• Completely assembled

Packaging

Videos:

Specifications:

Tucker Fill n Go Specifications

Each system features the following:

Single or Dual User set ups

• The single user includes (1) pump, (1) flow control valve, (1) hose reel
• The dual user includes (2) pumps, (2) flow control valves, (2) hose reels

(1) 2.5 in. x 10 in. Sediment pre-filter

(1) 2.5 in. x 10 in. Carbon pre-filter

(1) 40 in. Reverse osmosis member – 90% removal of impurities

(1) 4.5 in. x 10 in. DI Post-filter

Powerful 5.3 gpm production boost pump (increase production into the tank with this boost pump activated)

Automatic shut-off that stops when the tank is full

Inline TDS meter for water monitoring of RO and DI production

Remote controlled digital flow meters for each operator allowing for easy on/off of water flow as well as the ability to turn up or down the flow depending on the application.

200 feet of high quality 3/8″ ID supply hose

(1) Year manufacturers warranty
 

Dimensions:

Length: 43 in.

Width: 28 in.

Height: 37 in.

Weight: 210 lbs. (without water)

The Fill n Go unit will easily fit in a compact van or mobile trailer.

More Info:

Fill N Go Pure Water Systems come equipped with a RO Only feature.

• Operating & Set Up manual (pdf)

RO Only Option:

RO filters greatly reduce water TDS without the aid of DI filters. Under pump pressure this reduction will be greater than under tap pressure. Windows can be washed spot free with water up to 10 ppm TDS. Non-Glass surfaces can typically be washed with water up to 40 ppm TDS.

The 52 gallon tank in your Fill N Go system fills with RO water. You can monitor the TDS of the water from the ROs during filling with your Dual TDS meter. The IN setting reads the RO water filling the tank. The OUT setting only reads water purity after DI filtration.

To clean with RO water directly from the tank, turn the RO/DI water selection valve handle to the vertical position. To clean with deionized water, turn the RO/DI water selection valve handle to the horizontal position.

Turn on your delivery pump controller and adjust for desired flow. Water will flow from different system outlets depending on valve position.

Directions:

The Digital flow controller is an integrated pump controller that allows the user to regulate the amount of water that flows from the tank. This allows you to set the precise amount of water you need to clean windows and solar panels. The LCD panel is easy to use when you want to adjust the water flow rate.

• Settings from .5 to 5.3 gallons per minute
• Recommended minimum setting is .5 gpm
• On average you can expect a 3 – 4 hour run time on a battery charge operating at 1.8 gpm
• Average current draw is 4 -5 amps of energy

Built in float valve to automatic shut off when water level reaches near the top