Granite Polish Gel – Floors / Countertops

Description

Eureka gel is a new polishing gel, specially formulated to polish granite and gres quickly and easily, using a single disc floor machine or a grinding-honing machine. It is possible to use it on smoothed materials, starting from grain 220 and above, or in alternative to tin oxide. It is a gel product, specifically designed to polish new granite and gres surfaces or to restore polished floors that lost gloss and color by high traffic.

• Easy to use and provides immediate results.
• Contains no lead
• Perfect for granite, gres and quartzite hard stones
• Easy clean up
• Coverage is approximately 300-400 sq. ft. per liter
• When used with a natural fiber polishing pad, one can achieve excellent results

Packaging

1 liter container

Videos:

Specifications:

Granite Polish Gel Specifications

Type: Floor / Countertop polish gel

Appearance: Gel

Color: Transparent

Scent: Odorless

pH: 5.5 -5.8

Shelf Life: 24 months

More Info:

Recommendations:

Do not dilute the product with other solvents or water. Only in the case of an excessive drying of the product is it recommended to add water during the polish process.

In case of application of the floor with underfloor heating, turn off the heater and let the stone cool completely.

Before use read carefully recommendations printed on the package and perform a preliminary test.

Best results are achieved using a heavy weight machine, ideally in the range of 150-200 pounds.

Estimate Coverage

1 liter of Granite Polish Gel will treat 300-400 square feet per liter.

Directions:

Floor Application:

Surface Preparation:

Surface must be dry and clean. Wash the floor thoroughly with a floor machine and appropriate pad (green is suggested), eliminating dirt, residues of old floor finish and embedded soil (we recommend to use our pH Neutral stripper); rinse well and dry with a wet vacuum.

Place 1 oz. of Eureka Granite Polish Gel on the floor: place a standard speed floor machine equipped with a natural fiber floor pad on the product, moisten lightly, then work with the floor machine.

Spray or mist water on the floor in case Eureka dries too quickly during the polishing process. Afterspreading the product over the floor surface, work until complete drying of the gel has occurred and you have achieved the desired level of gloss.

Lastly, wash and rinse withwater and an alkali cleaner to remove product residue and to neutralize the acidity.

Countertop Application:

Surface preparation:

Surface must be dry and clean. Wash the countertop eliminating dirt, residues of old wax and treatments (we recommend to use our pH Neutral Stripper); rinse well and buff. Put a small amount of product .25 – 50 oz on the surface to be treated, moisten with few drops of water; proceed to polishing using an angle polisher with variable speed, equipped with white polish or orange automotive polish pad, speed rotation should be between 800-1500 rpm (1000 rpm is optimal).

Work the surface until complete drying of gel and achievement of result. Wipe off excess with water and neutral detergent. Above procedure can be repeated if necessary.