Compare

	Wet Floor Drying System - Battery Powered Floor Dryer remove	Floor Pad Centering Device for Floor Machines / Floor Buffers remove	Compact Floor Buffer / Floor Polishing Machine (P13 - P15) remove	Gripper Mop Handle w/ Aluminum Handle remove
Image
SKU	1433000	PARMALI792460	1430213	BWK610
Rating	0 out of 5	0 out of 5	0 out of 5	0 out of 5
Price	$624.00 Per Each	$23.35 Per Each	$1,385.10 Per Each	$17.53 Per Each
Stock	Out of stock	Out of stock	Out of stock	Available on backorder
Availability	Out of stock	Out of stock	Out of stock	Available on backorder
Add to cart	Read more	Read more	Read more	Add to cart
Description	The Hurricone wet floor drying system is a battery powered high velocity floor drying fan. This highly visible, cordless floor drying system dries wet floors quickly. It's designed for high visibility in order to maximize safety and reduce injuries and accidents due to slips and falls. The cyclone fan dries an area of 15 feet in diameter, covering 175 square feet of floor space. Operates up to 12 hours on a single charge. Dries floors in a 360 degree pattern - full floor coverage. Maintenance free battery. Portable and easy to use. Dries wet floors fast.	This universal pad centering device is designed to be used on most floor machines with either clockwise or counter clockwise rotation. It will also fit on most pad drivers and accommodates nearly all floor pads. Easy to install and remove with spring clips Fits universal pad drivers Accommodates machines with speeds up to 2500 RPM	The P-13 & P-15 compact floor buffer / floor polishing machine is a standard speed floor machine with a high power motor. This machine is designed with easy operator control, greater performance and reliability. It is the perfect size for stripping, scrubbing, spray buffing, or bonnet cleaning areas where a regular sized floor machine won't fit High performance 1 horsepower motor Severe duty gear case Built to last for years in a commercial environment Easy to use Maintenance-free motor and gear case	Gripper style mop handles hold wet mops firmly between the jaws of the mop handle. The clamping action of the jaws works with 5" (or larger) headband mops only. Clamp style ends make removing and replacing mop heads easy and efficient. Specially engineered jaws hold 5" the mop headband securely. Clamp style mop handle is made of a durable resin that resists cracks and breaks. For use with wide headband mops (5" or larger). Durable jaws securely grip wide headband mops. 60 in. overall length
Content	The Hurricone dries wet floors fast - designed with the occupants in mind and is ideal for supermarket, hospitals, nursing homes, assisted living centers, office buildings, truck stops, visitor centers, casinos, cruise ships, and grocery and convenience stores. Use this floor dryer where floor safety is crucial. - It is highly visible, cordless, quiet, yet dries wet, slippery floors quickly. - Developed to help alleviate the common problems of wet floors and slip hazards. - Locking swivel caster wheels stay put. - Decibel Rating: 56 db. - Low Battery indicator. - 36" yellow safety cone included. Intake air is introduced through the side slots and exits through the bottom, covering a full 360 degree drying pattern. - Dries floors 360 degrees around unit and up to 15 feet in diameter. - Cordless / Rechargeable - Runs up to 8 hours in a single charge (continuous use) - Reduce your floor drying time by up to 90%. The Hurricone dryer comes complete and ready to use. Included is the fan with wheeled base, rechargeable battery, AC charger and yellow warning cone. The Hurricone floor dryer includes the fan base / dolly, rechargeable battery, 36 in. high, 4 sided safety cone, and 110 volt charger. A switch on the base turns the fan on and off, and the unit can run for up to 8 hours on a single charge. After 8 hours of use, it requires approximately 8 hours to fully recharge the battery. The battery pack can be charged while in the unit, or removed and replaced with a fresh battery to avoid taking the unit out of service. Included is a battery saver circuit which automatically limits battery discharge to optimize the battery life. LED and audible warnings let you know when the battery is low.	A Universal Pad Centering Device used to retain floor pads on universal pad drivers. 6 1/8" mounting flange Quick release via "spring clip" Fits virtually all pad drivers Speeds up to 2,500 RPM Can be used on left or right rotation machines Accommodates all pad sizes	P-13 / P-15 Compact Floor Buffer / Floor Polisher Lightweight and easy to maneuver, the P-13 & P-15 have heavy duty features normally found only in larger machines. Compact design gets into tight spaces and hard to reach areas. One piece housing reduces noise and vibration for improved operator comfort. Heavy duty all steel planetary transmission stands up to the most demanding work. The P-13 is a 13" Floor Machine that provides the power and durability for the toughest jobs in a convenient, easy to maneuver size. The P-15 is a 15" Floor Machine with the same features as the P-13 with the added two inches of cleaning width. Thumb activated safety interlock switch prevents accidental start-up 175 rpm pad speed Steel switch box Bumper guard 1 hp motor Steel handle with cord wrap 50 ft. power cord Heavy-duty wrap around bumper The P-13 and P-15 allows you to get into those tight or small areas where a larger floor machine simply won't fit. Pad Holder (not included) order separately P-13 pad holder #1134011 P-15 pad holder #1134014	The plastic jaws firmly grip the mop head and allows for quick mop changes, while they hold the mop firmly between the jaws of the mop handle. This mop handle is designed to hold wide band wet mops, those with a headband size of 5 inches, this is considered wide band. The non-marking head won't damage or scratch floors when mopping. Changing mops is a snap Jaws accommodate virtually any 5" wide band mop head Handle dimensions: 1" x 60" Easily remove and replace wet mops The Gripper clamp makes wet mop head connection easy Lightweight, durable aluminum handle construction 60 in. length Directions: Simply place a wet mop between the clamping jaws and rotate the locking collar. The teeth on the face of the jaws will firmly grasp the headband of any standard wide-band wet mop. To remove the mop simply rotate the clamping collar and the mop will discharge.
Weight	N/A	N/A	N/A	N/A
Dimensions	N/A	N/A	N/A	N/A
Additional information

P-13 / P-15 Compact Floor Buffer / Floor Polisher

Directions: