Compare

Genuine Lambswool Applicator Pads are the professional floor specialists choice for a smooth even finish. From storefronts to gymnasiums, large areas and small, select from a full range of sizes.

This 100% natural lambswool pad offers efficiency and practicality. It can be washed and reused again and again and fits a standard threaded handle.

• 100% chrome tanned back
• Threaded handle not included (please order separately)

Ideal for the application of most oil based finishes and sealers.

Packaging

Videos:

Specifications:

Applicator Sizes:

10"- Part #: 0281010

12"- Part #: 0281212

16"- Part #: 0281616

Applicator Refill Sizes:

10"- Part #: 0280010

12"- Part #: 0280012

16"- Part #: 0280016

More Info:

Directions:

How to prep a Lambswool Pad prior to use:

1. Immerse the lambswool pad in a paint pan filled with mineral spirits for 5 to 10 minutes. This allows the lambswool pad to be more absorbent and help it spread urethane evenly.
2. Remove the lambswool pad from the mineral spirits and wring it out, allow the pad to remain damp but not soaked.
3. Install the lambswool pad on the applicator head by loosening the two wing nuts that hold the two pieces of the head together.
4. Wrap the lambswool pad around the bottom part of the head so that the wool is facing out. Make sure there is an even amount of the pad overlapping the top of the head on both sides.
5. Place the upper wood block onto the bottom block, sandwiching the lambswool pad between the two parts. Tighten the wing nuts to secure the pad in place.

How to apply finish with a Lambswool Applicator:

1. Open the container of oil base finish and pour it into a paint tray.
2. Dip the bottom of the lambswool pad into the finish. Drag the pad lightly across the edge of the paint tray to remove excess finish from the pad.
3. Place the lambswool pad on the surface of the wood and begin applying the urethane in long, even strokes going with the grain of the wood. When the finish becomes uneven, dip the pad back into the tray and re-wet.
4. Continue applying the finish until the entire surface of the wood is covered.

Duracell - ProCell Industrial Alkaline Batteries (9 volt) - The perfect power solution for all your commercial, household, and industrial needs. Duracell Industrial batteries deliver dependable, powerful performance that keeps going and going. Providing long life for the devices you use every day from commercial air fresheners to battery-operated towel cabinets.

Duracell alkaline batteries contain the long-lasting power found in ProCell alkaline batteries with a design enhanced for today’s heavy current or continuous use applications.

• Offer the longest lasting power source of all primary batteries over a range of sizes
• No mercury added - special disposal not required
• Operate well in temperature extremes -30°C to 55°C
• Excellent shelf life
• Alkaline cells are ready for use after 7 years of storage
• Having your alkaline batteries shipped to you is a great way to stock up

Packaging:

9V Duracell ProCell batteries are packed 12 batteries per case.

These are America's #1 pads for a reason. The durable steel wool, saturated with long-lasting soap, makes tough cleaning jobs quicker and easier. Reduce the time and labor needed to clean tough stains that find themselves inside the home and outside on the patio. Clorox is a world-trusted brand, so you can be assured that this product will meet and exceed your expectations.

Use this steel wool pad on pots and pans, cooking utensils, maintenance equipment, and tough baked-on food particles. Features a powerful combination of fine steel wool and effective grease-cutting detergents.

Why choose steel pads over sponges and detergents?

• No guessing dilution ratios
• Cost effective; use one pad for multiple jobs without losing effectiveness
• Reduce labor costs; spend less time scrubbing and more time appreciating the shine
• No dish soap required

• The approximate life for these brushes is 300 hours
• The standard brushes are included with the machine
• Part # 1064615 = Cimex 4615, Tornado 90080, Karcher 6.680-002.0

• The approximate life for these brushes is 250 hours
• The bristles are impregnated with 80 grit silicone carbide to give that extra scrubbing bite to any dirty job
• The 4616 brushes are very aggressive and should only be used on aluminum escalators treads
• These brushes are not for use on escalators with a coated surface
• Part # 1066149 = Cimex 4616, Tornado 90081, Karcher 6.680-001.0

Specifications:

• Nylon brush set (2) regular daily maintenance
• Tynex brush set (2) periodic deep cleaning*
• *Tynex brushes are very aggressive, and only suitable for occasional use on aluminium escalators only (Do not use on escalators with a coated surface or powder coating as damage may result.

Directions:

1. Release the two locking pins securing the top cover and raise the cover to rest against the handle.
2. Disconnect the two hoses from the brush cover.
3. Tip the cowl forward to reveal the brush spindles.
4. Remove the brush retaining clips from the spindle ends and slide the brush on to the spindle engaging the narrow slot with the drive nib and refit the retaining clips.
5. Close the brush cowl and reconnect the two hoses.
6. Close the top cover and re-engage the locking pins.