Compare

These are America's #1 pads for a reason. The durable steel wool, saturated with long-lasting soap, makes tough cleaning jobs quicker and easier. Reduce the time and labor needed to clean tough stains that find themselves inside the home and outside on the patio. Clorox is a world-trusted brand, so you can be assured that this product will meet and exceed your expectations.

Use this steel wool pad on pots and pans, cooking utensils, maintenance equipment, and tough baked-on food particles. Features a powerful combination of fine steel wool and effective grease-cutting detergents.

Why choose steel pads over sponges and detergents?

• No guessing dilution ratios
• Cost effective; use one pad for multiple jobs without losing effectiveness
• Reduce labor costs; spend less time scrubbing and more time appreciating the shine
• No dish soap required

• The approximate life for these brushes is 300 hours
• The standard brushes are included with the machine
• Part # 1064615 = Cimex 4615, Tornado 90080, Karcher 6.680-002.0

• The approximate life for these brushes is 250 hours
• The bristles are impregnated with 80 grit silicone carbide to give that extra scrubbing bite to any dirty job
• The 4616 brushes are very aggressive and should only be used on aluminum escalators treads
• These brushes are not for use on escalators with a coated surface
• Part # 1066149 = Cimex 4616, Tornado 90081, Karcher 6.680-001.0

Specifications:

• Nylon brush set (2) regular daily maintenance
• Tynex brush set (2) periodic deep cleaning*
• *Tynex brushes are very aggressive, and only suitable for occasional use on aluminium escalators only (Do not use on escalators with a coated surface or powder coating as damage may result.

Directions:

1. Release the two locking pins securing the top cover and raise the cover to rest against the handle.
2. Disconnect the two hoses from the brush cover.
3. Tip the cowl forward to reveal the brush spindles.
4. Remove the brush retaining clips from the spindle ends and slide the brush on to the spindle engaging the narrow slot with the drive nib and refit the retaining clips.
5. Close the brush cowl and reconnect the two hoses.
6. Close the top cover and re-engage the locking pins.