Compare

Stain Remover - Juice Out for Removing Red Stains in Carpet removeFloor Wax, Floor Finish Stripper - Pour N Peel Floor Stripper remove
Image
SKUCOREJO100MISC112257
Rating
0 out of 5
0 out of 5
Price$10.14 Per Pint$26.24 Per Gallon
Stock

Only 1 left in stock

In stock (can be backordered)

AvailabilityOnly 1 left in stockIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

DescriptionJuice Out's unique formula works by separating the food coloring from the stained fiber through chemical reaction and/or heat transfer. When properly used, Juice Out will save you hundreds of dollars in replacement cost for just a few pennies per application.
  • Juice Out Stain Remover
  • For food, drink, and cosmetic dye for carpet and upholstery
  • Packed in a 16 ounce bottle with flip top
  • Sold each or by the case of 12
Heavy Duty Wax & Floor Finish Stripper - Pour N' Peel is the most effective labor saving stripper ever developed. Virtually eliminates the need for floor machines, pads, and rinsing. It will solubilize aged and built-up finishes and waxes almost instantly. The ultimate Cold Water Floor Stripper is designed to remove floor finish and sealers from heavily burnished floors.
  • Liquefies heavily burnished finish and sealers.
  • No harsh ammonia or solvent odors.
  • Powerful stripping action.
  • Extended suspension of emulsified particles eliminates costly re-stripping.
  • Powerful formula cuts through layers of old finish in minutes.
  • Low foaming.
  • Rinse free - No alkaline residue.
ContentFood Coloring (dye) Remover and Spotter is a professional strength food, drink, and cosmetic dye remover for carpet and upholstery. Low heat activation with an alkaline wet spotter are the keys to great results for tough stains. Food and fabric coloring is separated from the stained fiber through a chemical reaction in the heat transfer process. Most food coloring contained in artificial and natural fruit juices can be extremely difficult to remove from carpet fiber. Even with today's stain resistant technology, juice spills can eventually penetrate if not immediately blotted and sponge rinsed from the stained area. (Red dye is the most difficult to remove.) This product is the ultimate stain remover for those tough to remove **"red stains."** #### Directions: 1. Generously drip Juice Out to the stained area. 2. Gently agitate the stain with the rounded edge of either Core's T-bone spatula or tamp repeatedly with a spotting brush. 3. Wait 1 minute. 4. Submerse white terry towel in warm water. Ring out excess water and fold once. 5. With a steam iron, using the lowest temperature setting (for silk, polyester), place hot iron on top of folded moist towel and place over the stain. Allow the iron to remain over the towel and stain for 2 to 5 minutes. 6. Sponge, rinse or water extract the area. 7. Repeat Steps 1-6 if color still remains (normally, 2 applications are required). 8. Any remaining dye shadows may disappear as Juice Out continues to work overnight or until dry.Pour N' Peel is a high-power, high-speed floor stripper developed to penetrate and remove multiple coats of burnished floor finish with minimal labor. Utilizing advanced technology, this powerful professional stripper unlocks the chemical bonds of acrylic and urethane fortified floor finishes. Can be used as a no-scrub floor stripper or with a conventional floor machine and pad, depending on floor condition. Ideal for spray applications on cove moldings to soften and remove old finish accumulations.
  • Fast penetration of buildup finishes and sealer layers.
  • Powerful and fast acting.
  • Removes multiple layers of finish in fewer passes.
  • Variable dilution rate for job-specific needs.
  • Works in cool water.
Directions: The desired concentration depends on the buildup and age of the polish film:
  • For Average Build-Up: Dilute 1 to 4 with cold water.
  • For Moderate Build-Up: Dilute 1 to 3 with cold water.
  • For Heavy Aged Build-Up: Dilute 1 to 2 with cold water.
  • For Use With A Floor Machine: Dilute 1 to 8-16 parts cold water.
Mop solution generously onto the floor. Allow solution to stand for 5 minutes, keeping the floor wet. Agitate with a mop or scrubber if needed. Pick up the solution with a wet vacuum or clean mop. Allow floor to dry before applying any sealer or finish. Note: Test on asphalt tile, rubber, LVT, or vinyl flooring before proceeding with high concentrations.
WeightN/AN/A
DimensionsN/AN/A
Additional information
No-Splash Urinal Screen - Freshens the Restroom for 60 Days was added to the cart.
Shopping cart2
-
+
2
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare
Search
×