| Kaivac Horn - Accessory Mount Kit (OVHORNK) remove | Compact Battery Operated High-Speed Burnisher, 17 inch remove | Floor Wax, Floor Finish Stripper - Pour N Peel Floor Stripper remove | Battery Watering System for Floor Scrubbers, On-Board remove | KaiAuto - Kaivac Wide Area Squeegee Accessory remove | Carpet Dryer and Air Mover, High Speed Portable Blower remove | Kaivac Wand and 14 inch Squeegee Tool (SUBVW) remove | Kaivac Pre-Measured Kitchen Degreaser Packets remove | Ice Melt Spreader, 50 lb Capacity, Industrial Duty remove | |
|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  |  |  |  |
| SKU | 1299105 | 1428494 | MISC112257 | 1359500 | PARKAIVKAUTO28 | PAR86023 | 80SUBVW | PARKAIVKDPK | 915020 |
| Rating | |||||||||
| Price | $50.61 Per Each | $4,799.60 Per Each | $26.24 Per Gallon | $299.00 Per Kit | $170.39 Per Each | $399.31 Per Each | $126.24 Per Each | $71.71 Per Case | $646.94 Per Each |
| Stock | Out of stock | Out of stock | In stock (can be backordered) | Out of stock | Available on backorder | Available on backorder | Available on backorder | Out of stock | Out of stock |
| Availability | Out of stock | Out of stock | In stock (can be backordered) | Out of stock | Available on backorder | Available on backorder | Available on backorder | Out of stock | Out of stock |
| Add to cart | |||||||||
| Description | Add this versatile Horn Kit to your Kaivac Dispense & Vac or AutoVac. The perfect companion to store the vacuum hose, vacuum wand, power cord and wet floor signs. The Horn Kit can accommodate up to a 35 foot vacuum hose.
| This cordless 17" battery-operated high-speed burnisher makes daytime cleaning a breeze.
| Heavy Duty Wax & Floor Finish Stripper - Pour N' Peel is the most effective labor saving stripper ever developed. Virtually eliminates the need for floor machines, pads, and rinsing. It will solubilize aged and built-up finishes and waxes almost instantly. The ultimate Cold Water Floor Stripper is designed to remove floor finish and sealers from heavily burnished floors.
| This integrated Battery Watering System is the first self-contained automatic battery protection system of its kind in the commercial cleaning equipment industry. This technology maximizes battery life by protecting batteries from low water levels.
| The Kaivac 28 inch wide area squeegee head is designed for high speed wet vacuuming of large floor areas in most any facility.
| Portable Air Blower for flood restoration and high speed carpet drying. The G-3 air mover is ideal for flood restoration, drying carpets, hard floors, upholstery or wherever quicker drying time is required. This blower also works well in areas requiring added ventilation.
|
| An effective all purpose heavy duty cleaner / degreaser specially formulated for Kitchen floors, dispensed through any Kaivac Dispense and Vac machine.
| The 50 lb. capacity hopper with 10-inch pneumatic tires makes this ice melt spreader ideal for heavy duty winter use. Large-diameter tires can handle the roughest of terrain and negotiating over sidewalks and curbing. Adjustable flow rate controls amount of ice melt spread. The P50 Series spreader projects an even spread pattern allowing for better spreading coverage.
|
| Content | The Kaivac Horn Kit includes everything you need to install the Horn (even the tools).These versatile Horns can be used for hose and cord wrapping as well as hanging tools, wet floor signs or any number of other items. Plus, they can be installed in any of the vacuum tank insert ports located around the tank for maximum flexibility.
These versatile Horns can be used for hose and cord wrapping as well as hanging tools, wet floor signs, bins, supply bags or any number of other items. Plus, they can be installed in any of the vacuum tank insert ports or "bosses" that are located around the tank for maximum flexibility. These versatile Horns can be used for hose and cord wrapping as well as hanging tools, wet floor signs, bins, supply bags or any number of other items. Plus, they can be installed in any of the vacuum tank insert ports or "bosses" that are located around the tank for maximum flexibility. | The days of working with a corded ultra high-speed burnisher are over. The Battery Glazer 17 floor machine from Tornado is a one of a kind burnisher that operates on green batteries instead of a standard power cord. You no longer have the hassle of plugging and unplugging the unit as you clean different areas. Delivering two hours of run time before the batteries need to be recharged, the Battery Glazer 17 greatly increases your cleaning productivity, saving you time and money. For recharging, simply plug the on-board charger into the wall and you are done in no time! Cordless OperationCleaning more than 7,500 sq. ft. per hour, the Battery Glazer 17 will increase your cleaning productivity. With a two hour run time, you clean 15,000 sq. ft. on just one battery charge. Need to get under counter tops and maneuver in small healthcare or retail settings? The Battery Glazer 17 is the perfect solution for you.Incredibly Smooth, Simple OperationYour entire housekeeping staff can operate the Glazer 17 effortlessly. Unlike other traditional burnishers, this unit operates with a simple push, allowing the operator full and total control. Everyone on your cleaning staff will appreciate the Battery Glazer 17 thanks to its superior smooth maneuverability. This unit is a "must have" for housekeepers, building engineers and BSC's.
| Pour N' Peel is a high-power, high-speed floor stripper developed to penetrate and remove multiple coats of burnished floor finish with minimal labor. Utilizing advanced technology, this powerful professional stripper unlocks the chemical bonds of acrylic and urethane fortified floor finishes.
Can be used as a no-scrub floor stripper or with a conventional floor machine and pad, depending on floor condition. Ideal for spray applications on cove moldings to soften and remove old finish accumulations.
| On-Board Battery Watering System - The same type of battery used in golf carts, RVs, and small solar systems can now be used to efficiently power floor scrubbers. The superior features include patented manifolds, standard flame arrestors, three port swivels, clampless polypropylene tubing, and easy install winged caps. The system works by replacing the battery's existing vent caps with valves connected by tubing that allows users to fill all cell of the battery from a single location.
Battery Watering System Benefits:
PackagingWe offer two types of battery watering systems specifically for Trojan brand batteries. #1359500 is designed specifically for the Trojan J185 series battery. This is a 12-volt deep cycle battery consisting of 6 fill caps per battery with most automatic scrubbers having two batteries - this requires a total of 12 fill caps. #1359500 contains everything you need for a battery operated scrubber containing (2) J185 batteries. #1359510 is designed for Trojan 105/135 amp hour batteries (27 TMX & 30XHS). This is a 12-volt battery with the large plastic venting cover over the top of three cells as opposed to a single cell cap. #1359510 simply replaces the plastic cover plate with a set of (3) fill tubes and the correct length of hose.
Frequently Asked QuestionsHow often should I fill my batteries Watering intervals are dependent on the local climate, charging methods ,application, and age of batteries. Flow-Rite recommends that new batteries be checked once a month and older batteries be checked weekly until you get a feel for your water consumption rate. Typically for a heavy-use application, we recommend watering a maximum of once per week, and for light-use applications once per month. Generally it is best to water on Wednesdays for most applications. Specifically you should not water a battery that has been sitting for an extended period of time with no activity (non use or not on charge) such as a battery that has sat over the weekend. How long does it take to install a Pro-Fill kit? A typical installation will take an inexperienced person on average 5 minutes per battery. Do I need to remove the Pro-Fill system from my batteries in the winter? No. Your Pro-Fill system is designed to be left on your batteries while your vehicle is in winter storage; however, the system will not be operational while it is frozen. If you have vehicles that are taken out of service or put into storage fora period of 6 weeks or longer, your single point watering system will require seasonal maintenance. No special steps need to be taken for winterization of the SPW system that is mounted on the batteries; however, the following steps need to be followed when bringing your vehicle back into service: After the batteries have been fully charged / equalized, connect the system to its water supply for 3-5 seconds then disconnect regardless of whether or not the batteries are completely full. Return the vehicle to its regular service. How many batteries can I fill at one time? You can fill a total of four 12-volt batteries, or a total of eight 6-voltbatteries or a total of six 8-volt batteries or any other combination of batteries up to 24 cells at one time. When is the best time to fill my batteries? Water must always be added after fully charging the battery. If your battery charger has an equalize function it is best to add water after equalizing the battery. Prior to charging, there must be sufficient water to cover the plates. If the battery has been discharged (partially or fully), the water level should still be above the plates. How do I know when my battery needs water? We recommend that batteries are watered on a dedicated schedule to ensure that all batteries get watered.Directions:Installation:
| The Kaivac 28" wide area floor squeegee attachment is designed for high speed wet vacuuming of large floor areas. Excellent for use on large hallways, gym floor mats, cafeteria floors. large kitchen floors, fitness facilities, athletic mats and more.
| When you need maximum drying power add this blower to your drying jobs. The compact mid weight design for drying carpets; hard surface floors; walls; ceilings or for general air circulation.nn- Effective for drying all surfaces from floors and walls to circulating the air.n- Use the swing-out kickstand to improve airflow and speed up dry time.nnFeatures a 1/3 hp motor with three speeds and three built-in directional settings designed to handle all air movement requirements. Molded in lift handle; cord wrap and stackability makes the G-X easy to use and store. Direct this high velocity airflow Air mover to dry problem areas fast.nn**GX Air Mover Applications:**n- Carpets after extractionn- Hard floors after strippingn- Flooded areasn- Upholstery/carpeted walls after extractionn- Flood restorationn- Improved facility ventilationn- Advertising balloons | This 14" wide squeegee and aluminum wand is designed for use on hard surfaces when vacuuming water. Fitted with non-marking urethane blades and roller wheels, this tool glides across floor surfaces easily.
| A general purpose degreaser that rapidly penetrates oils, greases, fats, and soils. Kaivac's degreaser is perfect for food service, food processing and industrial applications where stubborn, greasy soils are prevalent. The unique formula used in the degreaser contains no harmful acids (often found in many kitchen floor cleaners).
| The Spyker Ice Melt Spreaders with pneumatic wheels features a high-volume rotary spreader system designed specifically for spreading ice melting compounds. This 50 lb. capacity ice melt spreader is equipped with large 10" x 5" pneumatic tires for extra durability. These are best suited for locations with rough terrain and heavy snow fall.
Features of the Industrial Duty 50 lb Ice Melt Spreader:
|
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
