Compare

Un Goo Sticky, Oily & Greasy Stains & Tape Remover is a low / NO–VOC formula, effective for virtually all grease, gum, oily and adhesive problems on carpet, fabric, hard surfaces, vinyl, metal, tile and more. Un-Goo can be used both indoors and outdoors.

Proven to Effectively Remove:

• Chewing gum
• Sap
• Crayon marks
• Stickers
• Adhesives
• Shoe polish
• Grease
• Lipstick
• Tape
• Motor oil
• Scuff marks

Packaging:

32-ounce bottle with trigger sprayer, sold each or by the case of 6.

Directions:

1. Spray around edges, wait 60 seconds.
2. Peel off with the help of the 4-in-1 spotting tool or brush.
3. Repeat if necessary.

1. Spray stain thoroughly, wait 60 seconds.
2. Gently agitate with a spotting tool or brush.
3. Blot thoroughly with a clean, white cloth. Repeat if necessary.

1. Spray stain thoroughly, wait 60 seconds.
2. Agitate with a spotting tool as directed or rub fiber together. Launder following fabric recommendations. Repeat if necessary.

1. Spray stain thoroughly, wait 60 seconds.
2. Wipe with a clean cloth or rinse off. Repeat if necessary.

A thin brown Dry Stripping Pad for use with the Square Strip and Square Scrub machines are designed to remove floor finish without chemicals. Remove several layers of acrylic finish to prep for recoating. Use dry on VCT and tile. The SPP effectively removes floor finish using only water or neutral cleaner, preparing the floor for finish application.

No Chemical Strippers Needed

The Surface Prep Pads require only neutral cleaner or water to effectively remove floor finish, preparing the floor for finish application. The product can be used on vinyl tile, VCT, marble, terrazzo, concrete, and other floor types.

• Made from 100% recycled content!
• Square Strip Surface Prep Pads (dry stripping pads)
• Reduces the need for chemical strippers
• Helps reduce labor hours and material costs related to stripping floors
• Effectively removes floor finish, leaving a clean surface ready for recoating
• Heavy-duty scrubbing for 2-4 coat removal prior to recoating
• Color: Brown
• Pad size: 14" x 20"

The expected life of the pad is between 2,000 - 2,500 square feet when used dry. Recommended for use on Square Strip and Square Scrub - Oscillating/Orbital Floor Machine.

The Green Initiative used in our floor pads - Floor Pads with Enhanced Biodegradation

Our goal is to produce products that perform to the highest standards while leaving the smallest possible impact on the environment. A leader in the Jan/San industry for 45 years, Our floor pads are made with 100% recycled fibers for well over a decade. We're now completing the cycle by introducing an innovative floor pad technology that has been specially formulated to biodegrade in a fraction of the time once discarded into a landfill, compared to conventional pads.

* When consumers see the Full Cycle label, they will know they have a quality product while reducing mankind's impact on the environment. Being good stewards of the environment is simply our corporate responsibility - and it’s what sets us apart from other manufacturers.

The Proof is in the Performance - For stripping, cleaning, polishing or burnishing, we have the pad. Only top quality materials go into our pads which result in top performance.

Directions:

Directions for Use:

1. Surface Preparation Pad can be run on auto-scrubbers, swing machines or rectangular floor machines.

2. Use the SPP - Surface Preparation Pad with Rinse Free Neutral Cleaner Concentrate.

3. A flexible backer floor pad, such as the White or Red floor pad can be used to hold the SPP Surface Preparation Pad.

4. After scrubbing, rinse floor with water.

5. Once floor is dry, dust with Microfiber Dust Mop or Vacuum.

6 Apply new coats of floor finish The

SPP Surface Prep Pads are designed to be used on both sides with pads typically being flipped to the second side after approximately 3,000 - 3,500 square feet of use in wet applications or 2,000 - 2,500 when used dry.

Pad Cleaning:

If pads can not be rinsed right away, pads should be placed in a plastic liner after use to prevent finish residue from drying onto pad before rinsing. Pad may be rinsed under a faucet or with a hose. A pressure spray nozzle will remove residue most effectively. Hang pads vertically to dry.

Rectangle Sanding Screens - These 14" x 20" mesh screen discs with strong fiber, uniform open construction and consistent cut from start to finish.Sanding Screens are an open mesh fabric heavily coated with silicon carbide abrasive. Its durable, open weave mesh design is non-loading and coated on both sides for longer lasting reversible wet or dry use.

• The open mesh construction resists loading.
• The higher the grit number (example 120 grit) the finer the disc. 
• Available in grits from: 60, 80, 100, 120
• Average life expectancy for screen discs when used on wood floors is 300-400 square feet per disc.
• When used on concrete floors coverage will vary from 100-150 square feet per disc.
• Size: 14" x 20"
• Packaging: 10 screens per case.

Specifications:

Rectangle Screen Discs:

Grit: 60
Part # 0271020

Grit: 80
Part#: 0272020

Grit: 100
Part #: 0273020

Grit: 120
Part #: 0273520

Grit: 150

Part #: 0274020

More Info:

Intended Use:

• Refinishing wood gym floors and racquetball courts at schools and/or sports facilities
• Preparing concrete, wood, and other floors for coating and recoating with typical sealers or finishes

Directions:

General Use:

1.Lay screen on floor
2.Place a red spacer pad (14 x 20) on top to use as a drive pad
3.Place the Square Strip machine on top of the pad and screen
4.Operate machine as normal