Compare

400 grit Twister Heavy Duty Red pads are for heavy-duty cleaning and scratch removal of worn terrazzo and stone floors. Twister HD Red will effectively remove scratches and stains from the surface and leaves a clean, matte surface prepared for the subsequent Twister steps.

• Pads are impregnated with billions of microscopic diamonds instead of traditional abrasives.
• Natural fiber material (hog hair).
• Longer lasting than conventional Twister Red pads.
• Twister HD Red is a problem solver for natural stone or concrete floors that have been etched or stained.
• Assists in removing scratches in Terrazzo & Concrete floor surfaces.
• On heavily guarded, coated or finished floors, TXP can be used to deep scrub or strip the floors prior to re-coating. 

Twister HD Red is a non-woven pad made from recycled PET blend with natural hair impregnated with microscopic diamonds bound in resin. Diamond abrasive applied on one side of the pad. Thickness of the pad is approximately one inch.

Twister HD Red Pads are Available in Sizes:

• 13, 14, 16, 17, 20, 24, 27 inch 

Packaging

Twister HD Red pads are packaged 2 pads per case.

Videos:

Specifications:

• Twister Floor Pad Brochure (pdf)

• Twister Floor Pad Handbook (pdf)

Twister HD Red Diamond Pads

Brand: Twister 

Color: Red (single sided)

Abrasive Content: 400 grit

Sizes: 13 in. - 27 in.

Thickness: 1 in.

Fiber: Natural fiber (hog hair)

Tensile Strength: 65 lbs.

More Info:

Average Life Expectancy

Under normal conditions (according to the manufacturer) the Twister Red (400 grit) pad will last between 15,000 - 12,000 square feet before it's time to replace it. In a real world application the actual life is more along the lines of 4,000 - 6,000 square feet.

This is factoring in making 4-6 passes over the floor in order to perform the proper surface in preparation for the next step.

Directions:

Maintenance of the Twister Pad:

Twister HD Red (400 grit) pad is designed for use with an automatic scrubber or standard speed floor machine with an operating speed between 150 -350 rpm. Do not use a high-speed burnisher with the Twister HD Red pad.

1. Remove pad from machine after each use.

2. Rinse the pad thoroughly with water. This removes dirt that can wear on the floor and your Twister Pad.

The Easy Gloss System is a floor finish applicator designed to make floor finish coating faster and easier, while eliminating waste. The system features a lightweight applicator, convenient backpack and a microfiber applicator pad.

• Lightweight durable handle with finger tip dispense control.
• Padded backpack with adjustable straps for personal fit.
• Easy mounting applicator pad system.
• 1.5 gallon floor finish pouch included

Easy Gloss refillable 1.5 gallon bags are sturdy, reusable, and easy to fill and install. Bags can be filled with virtually any floor care chemical. Max liquid volume is 1.5 gallons. Under normal use conditions the pouch can be filled and reused up to 30 times.

*Not for use with oil base floor/wood finishes.

Easy Gloss Applicator Features

• Heavy Duty Canvas Backpack
• Ergonomically designed with padded, shoulder straps that are adjustable for desired fit

Refillable Floor Finish Bags

• Easy to fill and install
• Bags can be filled with virtually any non-acid floor care chemical
• 1.5 gallon capacity

Anodized Aluminum Handle - 56.5 inch

• Corrosion and shock resistant
• Lightweight

Swivel Trigger Operated Fluid Dispenser

• Allows quick and easy fluid dispensing
• Continuous flow when the valve is depressed
• Dual outlet dispenses fluid at a 90 degree angle - eliminates liquid collecting on the mop frame
• Swivel trigger moves with natural movement of operator making it more ergonomic.

Unique Frame Design

The 16" Cling-On molded flat mop frame with quick connector has molded-in spikes - the mop pad clings to the frame (no hook and loop strips) - and holds your mop pad firmly in place. Addresses ongoing nuisance issue of having to replace velcro strips that accumulate fiber and causes the frame to lose its grip on the mop.

Packaging

Easy Gloss Floor Finish Applicator Kit Includes:

• 56.5" Applicator handle
• 16" Nylon applicator pad holder - New
• Padded backpack with adjustable straps
• 18" applicator pad
• 7' supply tubing with pouch connector
• One refillable pouch (1.5 gallon capacity)

Videos:

Specifications:

More Info:

The 5' clean out fitting is a great option when a pressurized cleaning is necessary. Fits most standard faucets in commercial janitor sinks

• *Clean out fitting is an optional accessory
• Part #: 0354561

Specially designed filling station allows use of most water base floor finishes and many other cleaning chemicals such as neutral, general purpose, and disinfectant cleaners.

Refill stand kit is an optional accessory

The Refill Station Stand can be affixed to most flat surfaces (optional)

Using the funnel fill makes it easy to use in almost every cleaning environment.

• Simple funnel fill system
• Part #: 0354555

Directions:

Easy Gloss Floor Finish Applicator System

1. Prepare floor surface for coating.
2. Using the trigger at the top of the handle, depress to dispense a 4" puddle of floor finish onto the floor surface.
3. Applicator system will utilize the same application approach as conventional floor finish mop. Move applicator pad into the "puddle" to load the pad for initial use.
4. While moving applicator to new floor areas, dispense finish periodically and use U-shaped motion (section applications) as with conventional floor coating procedures.
5. Move at an even, uniform pace. Keep floor finish applicator pad uniformly wet with floor finish for proper coverage from one section to another.