Compare

The Ultra Propane Powered Burnishers provide a variety of buffing widths in a high powered propane machine. No need for high voltage electric cords and generators. Leading the industry in concern for the environment and the safety of its operators; All propane machines come standard with Emissions shut down System and engine kill switch. These burnishers feature rugged cast aluminum powder coated housings, harpoon faced pad drivers to reduce pad expansion, and long lasting, maintenance free batteries.

• Run time is 6 - 8 hours per propane cylinder.
• Emissions protected by 3 way catalytic muffler.
• Stonekor ProCarb carburetor and E-Zero emissions engine shutdown
• Low profile design for improved maneuverability.
• These 24" and 27" burnishers can quickly burnish right up to racks and corners with ease.

With an 18 hp Kawasaki engine this machine has muscle to spare and the industry's lowest emissions. The 3/16" thick aluminum pad plate flexes for even shine on the most uneven surfaces. Its durable 3/8" thick aluminum housing has an attractive, stain resistant "powder coated" finish.

Shipping rates range from $175 - $240 depending on final destination

Residential deliveries may incur an additional charge of $50 - $75

The Flip Down Doorstop installs in minutes and does not require any tools. They clip right onto the door and can be adjusted as needed to fit your door. These doorstops are so easy to use: flip the arm down, it's a door stop; flip it up, it tucks completely out of the way.

Benefits of the Flip Down Doorstop:

• Eliminates trip hazards
• Releases with force in case of emergency
• Grey color to match nearly every door
• Attaches to the door so it won't get lost
• Versatile, functional, and durable
• Will not damage the floor or the door

Use the doorstop in the following locations:

• Schools
• Offices
• Hospitals
• Homes
• Restaurants
• Stores
• Nursing Homes
• Warehouses

How to install:

1. Slide clip onto the bottom of the door. (Requires 1/4" clearance between the floor and the door, but no more than 2-1/2")
2. Locate the proper arm setting. Arm should be set at approximately 60-80 degrees when in the down position.
3. Spread swing arm in the upright position (swing arm only adjusts in the upright position).
4. Insert hinge pins into the proper holes.
5. Use hand or foot to engage or disengage.
6. The swing arm can be reversed if desired.

Natural fiber / Hog hair pads are an aggressive floor buffing / burnishing pad primarily used to polish and restore floor finishes that are badly scuffed or scratched. This pad is generally used with electric or battery-powered high-speed burnishers and work equally well with standard-speed floor machines (175-350 rpm). Due to the aggressive nature of the natural hair used in these pads it's generally not recommended for use with propane powered floor machines.

Unique features of the Natural Fiber pads:

• Will not glaze over
• Best for mark removal
• Recommended for use on machines operating from 175 - 3,000 rpm
• Recommended for use on hard floor finishes or floors that require a more aggressive pad
• Best choice for those looking for a more aggressive hair pad to remove scratches from floors that are not burnished with a high degree of frequency

Packaging

Natural fiber floor pads are sold individually or as a case of 5.

Videos:

Specifications:

Available sizes:

• 13" #0270413
• 17" #0270417
• 19" 0270419
• 20" #0270420

Our natural fiber floor pads are equal to the 3M 3300 and the ETC Gorilla floor pads.

More Info:

Recycled Content of Our Floor Pads (PDF)

The Green Initiative used in our floor pads - Floor Pads with Enhanced Biodegradation
Our goal is to produce products that perform to the highest standards while leaving the smallest possible impact on the environment. A leader in the Jan/San industry for 45 years, Our floor pads are made with 100% recycled fibers for well over a decade. We're now completing the cycle by introducing an innovative floor pad technology that has been specially formulated to biodegrade in a fraction of the time once discarded into a landfill, compared to conventional pads.

* When consumers see the Full Cycle label, they will know they have a quality product while reducing mankind's impact on the environment. Being good stewards of the environment is simply our corporate responsibility - and it’s what sets us apart from other manufacturers.

The proof is in the performance - For stripping, cleaning, polishing or burnishing, we have the pad. Only top quality materials go into our pads which result in top performance.

Directions:

General Use Directions:

1. Dust mop and clean floor surface. The Microfiber Fusion dust mop may be effectively used for dusting floor.
Note: Burnish only on a clean floor.
2. Install the Natural Fiber Burnish Pad on a high-speed burnisher. It may be a corded electric, battery, or propane burnisher.
3. Burnish to a high gloss using overlapping passes.
4. Dust mop floor surface with a Microfiber Fusion dust mop. 

Floor Pad Maintenance:

1. After burnishing, if next burnishing will be with same pad, leave pad on burnisher. Otherwise, remove pad and store.
2. Examine pad. Remove excessive dust and debris with a the center *"knock out"
3. Flip pad periodically.
4. Discard pad if thickness decreases to point where pad holder hooks extend completely through pad.

*Floor Pad Tip:

Did you ever wonder what that small circular cut-out in the center of the floor pad is?...

This little circular disk is used for cleaning the floor pad. Simply remove it and brush the entire surface of the floor pad (both sides) and re-insert it back in the center hole and re-use in the future.