Compare

• Best when used with machines machines operating at 1000-3000 RPM.
• Designed for frequent burnishing of soft to medium finishes.
• 20" pad with web-like design to insure quality polish.
• Better quality than competing pads with medium finish polish.

More Info:

Our goal is to produce products that perform to the highest standards while leaving the smallest possible impact on the environment. A leader in the Jan/San industry for 45 years, Our floor pads are made with 100% recycled fibers for well over a decade. We're now completing the cycle by introducing an innovative floor pad technology that has been specially formulated to biodegrade in a fraction of the time once discarded into a landfill, compared to conventional pads.

* When consumers see the Full Cycle label, they will know they have a quality product while reducing mankind's impact on the environment. Being good stewards of the environment is simply our corporate responsibility - and it’s what sets us apart from other manufacturers.

The Proof is in the Performance - For stripping, cleaning, polishing or burnishing, we have the pad. Only top quality materials go into our pads which result in top performance.

Directions:

General Use Directions:

1. Dust mop and clean floor surface. The Microfiber Fusion dust mop may be effectively used for dusting floor.
Note: Burnish only on a clean floor.
2. Install the Blue Ice Burnish Pad on a high-speed burnisher. It may be a corded electric, battery, or propane burnisher.
3. Burnish to a high gloss using overlapping passes.
4. Dust mop floor surface with a Microfiber Fusion dust mop.

Floor Pad Maintenance:

1. After burnishing, if next burnishing will be with same pad, leave pad on burnisher. Otherwise, remove pad and store.
2. Examine pad. Remove excessive dust and debris with the center *"knock out"
3. Flip pad periodically.
4. Discard pad if thickness decreases to point where pad holder hooks extend completely through pad.

*Floor Pad Tip:

Did you ever wonder what that small circular cut-out in the center of the floor pad is?...

This little circular disk is used for cleaning the floor pad. Simply remove it and brush the entire surface of the floor pad (both sides) and re-insert it back in the center hole and re-use in the future.

• Clean hard, flat surfaces like tables, desks, and cabinets with the Microfiber pad attached to the hand trowel.
• Clean vertical surfaces with the wall washing frame with swivel head and a telescopic handle.
• Clean walls and other hard-to-reach surfaces with the high performance microfiber pad.

Directions:

1. Fill the solution bucket with cleaning detergent.
2. Place mops microfiber side face down in clean bucket (orange).
3. Pour solution back and fourth over mops.
4. Place lid on bucket, making sure seal snaps in place on all 4 corners.
5. Flip bucket over and let it sit for a minimum of 5 minutes.
6. Remove the lid and place the Hand Trowel over the microfiber pad.
7. Lift the hand trowel from the pre-treat bucket and begin your cleaning procedure.