Description
Save the cost of paper towels withe Thin Air hand dryer. The following additional costs are eliminated: ordering, storing, replenishing, collecting and disposing of paper towels (95% savings vs. paper) and uses 80% less energy than traditional hand dryers (when heat is adjusted). Includes a wide dispersion nozzle to reduce noise.
- Dries hands completely in 14 seconds
- Automatic (hands free) activation promotes hygiene
- Surface-Mounted design
- Long Lasting – Backed with a 5 Year Limited Warranty
- Variable speed and heat settings for increased energy savings
- Adjustable Speed and Sound Control
- Multi-Voltage Options: 110-120 volts & 208-277 volts
- Adjustable Heat Settings – High, Medium, Low & Off
- Externally Visible Service LED
Quantity Hand Dryer Recommendations:
One dryer for every two wash basins is sufficient for most applications. If restroom traffic is unusually heavy, we suggest one dryer per wash basin in small installations and two dryers for every three wash basins in larger installations. When a 54″ wash fountain is used we suggest four to five dryers.
Packaging
Videos:
Specifications:
Thin Air Hand Dryer Specifications
Type: Hand Dryer
Cover Finish: White Epoxy
Activation: Automatic Sensor Operated
Mounting: Surface Mounted
Dimensions:
- Width: 9.5 in.
- Height: 14 in.
- Deep: 4 in.
Weight: 9 lbs.
Electric Specifications:
- 110-120 volts (7 – 7.7 Amps, 770-915 Watts, 50/60 Hz,
- 208-277 volts 3.6 – 4.0 Amps, 735-950 Watts, 50/60 Hz,
Warranty: 5 Year Limited
More Info:
Construction
- All covers will be fastened to a base plate by one chrome plated tamper-proof bolt. The cover shall be composed of: ABS – White polymer with SanaFor antimicrobial additive.
- Base plate shall be equipped with (3) 7/8″ (22 mm) diameter knockout
located on the right side and suitable for use with surface conduit. - All internal parts shall be coated according to Underwriters’ Laboratories, Inc. requirements.
- Entire mechanism shall be internally grounded, per UL requirements.
Mechanism
- Motor shall be a thermally protected, series commutated, through flow discharge vacuum motor/blower (~½ hp / high-30,000 rpm, low-20,000 rpm) which provides air velocity of up to 16,000 LFM (linear feet per minute) at the air outlet.
- Heating element (550 W) is constructed of Nichrome wire and mounted inside the blower housing behind air baffle, thereby being vandal resistant. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 141°F (61°C) at a 72°F (22°C) ambient room temperature at the outlet and 101°F (38°C) at the hands (4 inches [102 mm] below air outlet).
- Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. Control includes a motor speed control mechanism, 3 power settings for the heater and a filter sensor, which is activated should the air intake become clogged. There is a 35 second lockout feature if hands are not removed.
Warranty
The dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include labor performed at factory as well as the repair or exchange of defective parts, at manufacturer’s option.
Directions:
Suggested mounting height from floor to bottom of dryer:
Men’s room: 45 in.
Ladies room: 43 in.
Teenagers: 41 in.
Small children: 35 in.
Handicapped: 37 in.
Reviews
There are no reviews yet.