Water-Based Urethane Gym Floor Finish is a one-part water-based urethane/acrylic wood finish that provides long-lasting beauty and protection to all wood floors. There is no mixing of a catalyst. It lays down easily with an applicator, is re-coatable in about two hours and ready for traffic in 24 hours. In addition to offering excellent black mark, spill and scuff resistance, this product is easily repairable with a high speed burnisher. Meets or exceeds all federal and state regulations for VOC content.

Full Court is a single component water base wood floor finish (requires no catalyst be added). This is a “buffable” type of finish where the wood floor finish is catalyzed and a more permanent type of finish.

The major advantage of Full Court is, it’s simple. Easy to apply and no mixing is required. Easily repaired with a high speed burnisher and a soft floor pad. If you desire a more resistant finish we suggest “Commercial Wood Floor Finish“.

Features:

• No catalyst required!
• Protects against perspiration and routine cleaning
• Easy to maintain
• Extremely durable one-component sport floor finish
• Very low VOC-VOC does not exceed 140 grams per liter
• Virtually odorless
• Fast drying – Approximately 2-3 hours
• High gloss finish
• Will adhere to most solvent-based and waterborne finishes after proper preparation, drying, and curing times

Recommended Uses

• Basketball courts
• Volleyball courts
• Racquetball
• Badminton courts
• Multi-purpose gym and stage
• Aerobic floors
• Dance floors
• Residential wood floors
• For most wood floor surfaces

Do not apply any Water Based Finish to wood floors that have been cleaned with Murphy’s Oil Soap or similar products. The oil residue left behind will impede the ability for any water based finish to adhere to the floor surface. If you suspect this has occurred we highly recommend cleaning with Recoat Conditioner & Prep Cleaner and a follow up with Maintenance Cleaner prior to screening.

Packaging

This water-based floor finish is packaged in one 5 gallon pail.

More Info:

• Traditional Screen and Recoat Methods (pdf)

• T Bar Applicator (pdf)

• How to Recoat a Gymnasium Floor (pdf)

Directions:

One gallon will cover approximately 250-275 square feet of flooring with two coats. Example, if your gym floor is 6,000 square feet you would need to order 24 gallons of finish. This should provide you enough material to coat 6,000 square feet with two coats.

This finish is not designed for application to bare wood floors. Use only on previously sealed wood floor surfaces.

Recommended Applicator: T Bar Applicator