EZ Way Floor Finishing Pad | White, Cut and Loop Pad

Product Description

If you are using the K-100 applicator, the only refill you want is the “White Applicator Head” not the “Lambswool Pad”. The applicator pad (white) is made of rayon and polyester fiber (cut end). This head is suitable for water viscous finishes i.e. floor finishes and floor restorers. This head is both washable and reusable.

• The KV-2400 is a long napped poly-blend pad made of cotton and polyester,
• 24″ inches long with grommets that attaches easily to the frame assembly
• Designed for water based floor finishes

Directions:

Which one to choose?

The K-100 is for water base floor finishes used to coat VCT, vinyl, terrazzo, marble, and stone floors. If you are using the K-100 applicator the only refill you want is the “White Applicator Pad” not the “Lambswool Pad”.

The K-200 is primarily for water-base wood floor finishes due to the higher viscosity in water base wood finishes. The only difference between the K-100 & the K-200 is the size of holes in the manifold tube. The K-200 will dispense more material than the K-100. If you purchase a K-200 and notice too much material is dispensed through the manifold, simply tape the two end holes to reduce the amount.

The K-450 is specifically for high solid VOC compliant wood floor finishes. The K-450 does not have a manifold like the K-100 & K-220. Rather, it dispenses material directly to the floor.

The applicator pad (white) is made of rayon and polyester fiber (cut end). This head is suitable for water viscous finishes i.e. floor finishes and floor restorers.

The lambswool pad is for oil base and water base wood floor finishes. This head applies a thicker, heavier coat than the white pad.