Compare

	Encapsulating Carpet Cleaner, Carpet Cleaning Polymer remove	Encapsulating Carpet Cleaner - Recapture remove
Image
SKU	COREHPCCC128	MISC115545
Rating	0 out of 5	5.00 out of 5
Price	$40.49 Per Each	$36.85 Per Gallon
Stock	Only 2 left in stock	In stock (can be backordered)
Availability	Only 2 left in stock	In stock (can be backordered)
Add to cart	Add to cart	Add to cart
Description	A low-moisture encapsulation carpet detergent for commercial carpet care. Hydroxi Pro Carpet Cleaning Polymer 6-in-1 concentrated formula combines the cleaning and deodorizing power of Hydrogen Peroxide with the anti-resoiling capabilities of an encapsulating polymer. This unique formulation helps reduce contamination associated with indoor pollution without the build-up of sticky residue or high V.O.C. solvents. The result is a process that leaves your carpet cleaner than ever and fights re-soiling by encapsulating residual cleaning agents and soils in a hard, brittle polymer. Green Certified (EPA Design for the Environment Approved) HydrOxi Pro Encapsulating Carpet Cleaning Polymer Gallon container Sold each or by the case of 4	Recapture is a state of the art low moisture encapsulating carpet detergent. It is specially formulated with a balanced detergent blend to loosen and remove embedded soil from carpet fibers. Recapture contains a unique crystallizing polymer technology which enables encapsulated soil to be extracted from the carpet with subsequent post vacuuming. Recapture is excellent for use in commercial settings. Stops recurring spill stains Prevents wicking problems Highly concentrated New packaging - Lower price
Content	Encapsulating Carpet Cleaning Polymer - When the carpet cleaning polymer dries it forms one of the best releasing crystals in the industry. A brittle crystal is produced that can be extracted from the fiber with routine vacuuming. Deodorizes while you clean Natural orange fragrance Anti-resoiling & Color-safe Neutral pH for synthetic and natural fibers Safe for use as an Extraction Cleaner Traffic Lane Pre-spray Spot & Stain Remover Spin Bonnet Deodorizer One product for all your carpet cleaning needs Carpet Cleaning Polymer Can Be Used in Many Applications: Cimex Cylindrical brush Rotary Pad cleaning Bonnet/pad Spot cleaning Directions: There are four Carpet Cleaning Methods To Choose From Method 1: Encapsulation Measure 10 oz. of Carpet Cleaning Polymer and pour into a pump-up sprayer. Fill with hot water, mix, and build up compression. Begin by heavily spraying traffic lane areas such as doorways, hallways, elevator areas, break room/food service areas, main entryways, or any spots and stains, and all areas that appear darker than normal. Next, saturate the entire area to be cleaned with the 10-oz-per-gallon solution. Agitate by raking two directions, pushing the carpet rake forward in long strokes, then cross-raking the opposite direction. This raises the pile and allows better penetration of the solution. Wait ten (10) minutes, then extract with clean, hot water. With Carpet Cleaning Crystal there is no reason to use additives for deodorizing, brightening or de-foaming because it is all built into this unique formula. Dry the carpet using an Air Mover, floor fans, open windows or turn on HVAC units to the FAN ON position. Method 2: Normal Extraction: Add 2 oz. per gallon of Carpet Cleaning Polymer to your solution tank and fill with hot water. Extract as normal. Since you do not use a pre-conditioner or agitation with Method 2, overall cleaning will not be as effective as Method 1. Method 3: Bonnet / Pad Cleaning: (Low-moisture system) Mix Carpet Cleaning Polymer at 10 oz. per gallon of water. Soak bonnet, removing excess solution. Lightly pre-spray carpet, allowing 10 minutes dwell time, then bonnet clean, as normal. A clean mop bucket and wringer works well here. Method 4: Dry Agitation Cleaning: Mix Carpet Cleaning Polymer at 10 oz. per gallon of water. Pre-spray carpet (400 sq. ft. per gallon of RTU dilution) that's a 20' x 20' area. Agitate into the carpet with a carpet rake in two directions. (For best results, agitate with a counter-rotating brush action, let carpet area dry for 24 hours and vacuum thoroughly.) Spotting: Mix Carpet Cleaning Polymer 10 oz. per gallon of water. Soak problem area with solution. Agitate with carpet brush or rake and allow 5-10 minutes dwell time. Blot excess liquid with a clean, absorbent cloth. For tough, stubborn stains, repeat application procedures. Heavy Browning Area: Mix Carpet Cleaning Polymer at 20 oz. per gallon of water and pre-spray browned areas thoroughly followed by extraction with clean water. Use ceiling or portable fans to dry treated areas quickly.	Recapture Carpet Cleaning Detergent Recapture is a low-moisture encapsulation carpet detergent designed for commercial carpet care. It leaves carpets clean longer, with advanced fluoro protector to resist re-soiling. Features: Safe for stain-resistant carpets Dilution: 4 ounces per gallon of hot water Deep-penetrating cleaning Crystallized residue prevents re-soiling Reduces wicking and recurring stains No rinsing required Packaging: Recapture is packaged in one-gallon containers or four gallons per case. Directions for Use: Normal Cleaning: Dilute 4-6 oz. per gallon of warm or hot water. Spotter/Pre-Spraying: Dilute 6 oz. per gallon for heavily soiled areas. Apply evenly; avoid heavy foam buildup. For heavy soil, make additional dry scrubbing passes. Do not rinse. Always test for colorfastness in an inconspicuous area.
Weight	N/A	N/A
Dimensions	N/A	N/A
Additional information

Carpet Cleaning Polymer Can Be Used in Many Applications:

Directions:

There are four Carpet Cleaning Methods To Choose From