Cimex X-46 Escalator Cleaning Brushes

Product Description

Cimex / Tornado Nylon Brushes – White Nylon (Standard-duty)

• The approximate life for these brushes is 300 hours
• The standard brushes are included with the machine
• Part # 1064615 = Cimex 4615, Tornado 90080, Karcher 6.680-002.0

Cimex / Tornado Black Brushes – Tynex A Nylon (Heavy-duty)

• The approximate life for these brushes is 250 hours
• The bristles are impregnated with 80 grit silicone carbide to give that extra scrubbing bite to any dirty job
• The 4616 brushes are very aggressive and should only be used on aluminum escalators treads
• These brushes are not for use on escalators with a coated surface
• Part # 1066149 = Cimex 4616, Tornado 90081, Karcher 6.680-001.0

Specifications:

The approximate life for these brushes is 250-300 hours.

• Nylon brush set (2) regular daily maintenance
• Tynex brush set (2) periodic deep cleaning*
• *Tynex brushes are very aggressive, and only suitable for occasional use on aluminium escalators only (Do not use on escalators with a coated surface or powder coating as damage may result.

Directions:

Fitting the brushes

1. Release the two locking pins securing the top cover and raise the cover to rest against the handle.
2. Disconnect the two hoses from the brush cover.
3. Tip the cowl forward to reveal the brush spindles.
4. Remove the brush retaining clips from the spindle ends and slide the brush on to the spindle engaging the narrow slot with the drive nib and refit the retaining clips.
5. Close the brush cowl and reconnect the two hoses.
6. Close the top cover and re-engage the locking pins.