All Purpose, Rinse-Free Floor and Wall Cleaner – Simple Blue

Description

Simple Blue All-Purpose Cleaner is fast-acting, effective, and economical for use in countless applications. It works in both hard and cold water, and is a no-rinse formula that will not leave any film behind.

For floor care use, Simple Blue Cleaner aggressively removes embedded soils and scuffs in the top layers of floor finish and prepares the surface for re-coating with minimal rinsing required. This low foam formula leaves a clean, film free surface making it ideal for use in an auto scrubber. Simple Blue can also be used to remove the factory seal from newly installed VCT flooring and is compatible with any floor care program.

Use Simple Blue On:

• Ceramic tile, Walls, Restroom fixtures, Partitions, Counter tops, Vinyl seats, Floors, VCT (unfinished)

Simple Blue Benefits:

• Film-free
• Works in cold water
• Works in hard water
• Effective cleaner
• Low end-use cost
• No-rinse formula
• Multiple dilutions
• Countless applications
• Time Saving

Simple Blue is a general purpose cleaner and is NOT intended as a daily cleaner for finished floors. Simple Blue is an excelleant scrub and recoat cleaner for floor care maintenance.

Packaging

Simple Blue is packaged in gallon containers sold each or by the case of 4

Videos:

Specifications:

Simple Blue Cleaner Specifications

Active ingredients: 14%

Color: Blue

pH (concentrate): 10.5 – 11.0

Recommended dilution: 1:20 – 1:128

Viscosity: Water thin

Foam: Moderate

Solubility: Complete with water

Emulsification: Excellent

Rinsability: Complete with water

Flash point: None

Biodegradability: Complete

Storage / Stability: 2 years

Weight per gallon: 8.85 lbs/gal.

Freeze / Thaw stability: Keep from freezing

More Info:

Directions:

Directions for Use:

• Light-duty cleaning: Use 1 ounce per each gallon of water.
• Medium-duty cleaning: Use 2 ounces per each gallon of water.
• Heavy-duty cleaning: Use 4 ounces per each gallon of water. Apply product by spray, mop, sponge, cloth or auto-scrubber to surfaces to be cleaned. If necessary, agitate to help remove excessive soils. Wipe dry with clean cloth or rinse thoroughly with clean water after use.

Scrubbing and recoating of floors: Fill a mop bucket with Simple Blue Cleaner at 4 ounces per gallon and water. Apply to floor surface and allow 2-3 minute dwell time, scrub floor with blue/green floor pad under a floor machine/automatic scrubber.