Compare

The Remover Ultra High-Speed Burnishing Pad with a special binder formulation effectively removes black marks and restores gloss. Removes black marks, heel marks, floor scuffs, and returns gloss to your floor in fewer passes than other pads while producing less dust. Ideal for harder finishes and high-traffic areas. Excellent durability and minimal floor finish removal.

The pad is used on cord electric, battery, or propane-powered floor machines. Also designed for use on other finishes resistant to degradation from burnishing.

• Equipment type: Ultra high-speed machines (1,500 - 3,000 RPM)
• Best choice for scuff and mark removal while producing excellent gloss on harder floor finishes
• Great for retail, healthcare, and other facilities that want to minimize the dust generated by burnishing operations
• Made from 100% recycled content

General Use Directions:

1. Dust mop and clean the floor surface. The Microfiber Fusion dust mop may be effectively used for dusting floors.
2. **Note:** Burnish only on a clean floor.
3. Install the Eraser-type pad on a high-speed burnisher. It may be a corded electric, battery, or propane burnisher.
4. Burnish to a high gloss using overlapping passes.
5. Dust mop floor surface with a Microfiber Fusion dust mop.

Floor Pad Maintenance:

1. After burnishing, if the next burnishing will be with the same pad, leave the pad on the burnisher. Otherwise, remove the pad and store it.
2. Examine the pad and remove excessive dust and debris using the center "knock-out" disk.
3. Flip the pad periodically.
4. Discard the pad if the thickness decreases to the point where pad holder hooks extend completely through the pad.

Floor Pad Tip: The small circular cut-out in the center of the floor pad is for cleaning the pad. Simply remove it and brush the surface of the pad (both sides), re-insert it back in the center hole, and reuse it in the future.

More Info:

The Green Initiative used in our floor pads - Floor Pads with Enhanced Biodegradation

Our goal is to produce products that perform to the highest standards while leaving the smallest possible impact on the environment. A leader in the Jan/San industry for 45 years, Our floor pads are made with 100% recycled fibers for well over a decade. We're now completing the cycle by introducing an innovative floor pad technology that has been specially formulated to biodegrade in a fraction of the time once discarded into a landfill, compared to conventional pads.

* When consumers see the Full Cycle label, they will know they have a quality product while reducing mankind's impact on the environment. Being good stewards of the environment is simply our corporate responsibility - and it's what sets us apart from other manufacturers.

The Proof is in the Performance - For stripping, cleaning, polishing or burnishing, we have the pad. Only top quality materials go into our pads which result in top performance.

• ✔ Extremely absorbent – holds 200% more liquid than cotton
• ✔ Durable material – non-woven rayon/polyester blend
• ✔ Lint-free cleaning – no raveling or break-in needed
• ✔ Reusable – machine washable and dryable
• ✔ Bulk value – comes in a case of 12 mop refills