| Description | Stripping Boots provide premium traction on wet surfaces to reduce the risk of slipping. They allow you to spot clean without bending or using other tools. Highly visible, industrial grade protective cover for your shoes.
- A must have when stripping floors
- Replaceable stripper soles available as a package of 3 pairs
- Each pair of boots includes an extra set of soles
- Completely water proof
- Preserves your street shoes
| Cimex X-46 / Tornado BR-460 Escalator Cleaner Filter Kit
- These are the standard paper filters that come with the Cimex X-46, Tornado BR-460, Karcher BR 45/10 Esc
- It is recommended that these are replaced before they are completely full
- Filter bag capacity: 1.3 gallon
- Cimex #46C-0033
- Tornado #02-4372-0000
- Karcher #6.680-003.0
| |
| Content | These stripping boots provide premium traction on wet surfaces to reduce the risk of slipping and falling. They also protect your footwear from harmful chemicals.
Add these protective over shoes when scrubbing / stripping floors, no-more slip and fall accidents.
- Fit over most standard shoes and are sold in sizes from medium to x-large
- Long wearing replaceable soles
- Resistant to even the most aggressive floor strippers
Stripping Boots are sold as a kit and include:
- (1) Pair Protective Shoes
- (2) Pair of soles (dark brown pads)
Available sizes:
- Medium (8 - 9 1/2) #0278009
- Large (9 1/2 - 11) #0278010
- X-Large (11 - 14) #0278012
Replacement soles are available for longer wear of the boots. Manufactured from the same material as a medium duty scrubbing pad (brown) and can be used for cleanup.
- Replacement soles are sold as a package of 3 pairs
Packaging
Stripping Boots are sold as a kit and include:
- 1 Pair Protective Shoes
- 2 Pair Replacement soles (dark brown pads)
Sizes for Stripping Boots:
- Medium (8 - 9 1/2) #0278009
- Large (9 1/2 - 11) #0278010
- X-Large (11 - 14) #0278012
Sizes for replacement soles:
- Medium: 3 Pair Replacement soles #0278109
- Large: 3 Pair Replacement soles #0278110
- X-large: 3 Pair Replacement soles #0278112
Product update:
The soles supplied with the stripping boot are now a slightly less aggressive but a more flexible material. The conventional black pad proved to be too stiff and would sometimes "Pop Off" the boot. By using a less aggressive material with better flexibility the pad stays on the boot better.
A word about sizing: If you are unsure what size to order, order one size larger than your shoe size as they tend to run smaller. | Original equipment filter bags for the Cimex X-46 and Tornado BR 460
- Packed 10 filters per pack
These filter bags fit all newer Cimex X-46 escalator cleaning machines, manufacturer after serial #798237
Packaging
Escalator Cleaner filter bags are sold 10 filter bags per package.
Directions:
Filter Bag Replacement Instructions
- Release the two locking pins and raise the top cover.
- Push the top edge of the cardboard collar of the bag towards the rear of the machine until the bag is released from the vacuum tubes, and carefully remove the bag for disposal.
- Insert new bag pushing the rubber seals firmly over the tube ends until the cardboard collar is flat against the machine wall.
- Close the top cover and locking pins.
- The filter bag should be regularly replaced, and the hoses checked for blockages. If a bag bursts ensure that the filter is removed and cleaned before replacing with a new one.
IMPORTANT - The filter must be dry before replacing.
| |
