Compare

System features a wave baffle that reduces water splashing and spilling. Less mess will allow for safer, cleaner, more efficient mopping and the 35 quart capacity lets you tackle large cleaning tasks. This innovative mopping system features a high efficiency down press wringer that was tested to exceed 100,000 wringing cycles. This revolutionary bucket shape with molded-in wave brakes inhibits wave formation, which greatly reduces splashing under typical usage. Wave reduction continues even when the Dirty Water Bucket is in place.

• 35 quart capacity mop bucket
• High performance down-press wringer
• Wringing system preferred by floor techs
• Lasts twice as long as Side Press mop wringers.
• Tested to exceed 100,000 wringing cycles
• Accepts optional Dirty Water Bucket, 9C74

Combination kit includes: 35 quart mop bucket with 3" casters & down press wringer.

• 35 qt. WaveBrake Mop Bucket & Down Pressure Wringer

Down Press Mop Wringer The mop wringer is placed directly over the bucket, effortlessly wring out wet mops without the bending and strain of other style wringers. It's is also tested to exceed 50,000 wringing cycles and is 30% more efficient than comparable side press wringers. Easy-Lift Handle A durable metal handle enables easy lifting on and off janitor carts and allows you to pick up the bucket for emptying. Molded-In WaveBrake Design Featuring innovative WaveBrake technology, this highly-durable, web-molded plastic bucket uses its incorporated baffle to disrupt wave formation and reduce splashing by up to 40%, minimizing excess noise, accidental messes, and costly slips and falls.

More Info:

• Glides on four non-marking casters for fast transportation
• Can be paired with a dirty water bucket to keep dirty water and cleaning solution separated
• Minimizes excess noise, accidental messes, and costly slips and falls
• Exclusive down-press wringer extracts more water than ANY side press wringer

Unger Blue General Purpose Flat Mop - This 16-inch wide mop can be used wet or dry and features aggressive cleaning edges that require less water and effort, making it perfect for use on surfaces such as stone and tile floors with grout lines. Since it can be washed and re-used up to 500 times, you also save money by using fewer mop pads! This microfiber replacement mop head attaches securely to the Flat Mop Holder with 3 hole flaps. Use wet or dry, aggressive cleaning edges clean with less water, less streaking, and less effort. Heavy duty 15 mm pile flat mops for flooring that is heavily soiled with large dirt particles, sand, and grit. Reduces bacteria by up to 96%.

• Absorbs 6x its own weight for liquid pickup and retention
• Use with Unger Mop Holder SM40G

Best used for general floor cleaning, food service, and on specialty flooring with heavy soil in grout lines and on more uneven surfaces of the floor.

• 15 mm pile flat mops for flooring that is heavily soiled with large dirt particles, sand, and grit.
• Longer fibers for heavy-duty scrubbing, vertically knitted cut microfiber.
• Unger MM40B

More Info:

This 16-inch Unger flat mop can be used wet or dry and features aggressive cleaning edges that require less water and effort, making it perfect for use on surfaces such as ceramic, quarry, porcelain, and tile floors with grout lines.

Unger Red Restroom Flat Mop - Ensure your patrons and employees are in an exceptionally clean environment with the red Unger MM40R SmartColor wet/dry 15 mm mop pad, able to reduce bacteria up to 96%! Thanks to this pad's 15 mm pile microfiber, bacteria is limited, while Unger's SmartColor system helps to reduce cross-contamination thanks to its bright red coloring that distinguishes it for restroom use. This 16-inch wide mop can be used wet or dry and features aggressive cleaning edges that clean with less water, streaking, and effort, making it perfect for use on surfaces such as stone and tile floors with grout lines. Since it can be washed and re-used up to 500 times, you also save money by using fewer mop pads! Green cleaning microfiber products conserve water, reduce use of disposable products, and require fewer chemicals.

• Use wet or dry with mop holder, sold separately.
• Absorbs 6 times its own weight for liquid pickup and retention, easy rinse.
• Use with Unger Mop Holder SM40G

The mop is best used for restroom and lavatory use due to the red color used.

• Specialty flooring with heavy soil in grout lines and on more uneven surfaces of the floor.
• 15 mm pile flat mops for flooring that is heavily soiled with large dirt particles, sand, and grit.
• Longer fibers for heavy-duty scrubbing, vertically knitted cut microfiber.
• Unger MM40R

More Info:

This 16-inch Unger flat mop can be used wet or dry and features aggressive cleaning edges that require less water and effort, making it perfect for use on surfaces such as ceramic, quarry, porcelain, and tile floors with grout lines.

• ✔ Powerful Floor Stripping – Removes all finish, sealer, and contaminants with ease.
• ✔ Uniform Coating – Ensures even wear and long-lasting performance.
• ✔ Compatible with Low-Speed Machines – Designed for rotary or automatic floor machines operating at 175-600 RPM.
• ✔ Durable & Reliable – Manufactured for extended use, reducing the need for frequent pad changes.
• ✔ Convenient Bulk Packaging – Comes in a case of 5 pads for efficiency and cost savings.

For large floor finishing jobs, this floor finish mop provides performance with its 18 inch wide coverage. This blue / white, non-linting, looped-end mop is constructed of rayon and polyester blended fibers, which provides smooth gliding, releasing floor finish evenly.

• Looped end fibers help reduce streaking
• Tightly twisted, 4-ply yarn helps reduce linting
• Non-porous web backing allows floor finish to pass-through
• On average this mop delivers 250-300 square feet of coverage with a single mop load of finish
• Tightly-twisted, rayon / polyester blended looped-end mop absorbs and releases finish smoothly and evenly

• For refinishing wood gymnasium floors and racquetball courts at schools and sports facilities.
• For preparing wood, concrete or other floors for coating or recoating using conventional sealers or finishes.
• 60-80 grit screens are often used for the removal of concrete coatings while the 100-150 grit are generally used for wood floor preparation.
• Average life expectancy for screen discs when used on wood floors is 300-400 square feet per disc.
• When used on concrete floors coverage will vary from 100-150 square feet per disc.
• For use with conventional floor machines.
• Fast action wood floor refinishing.
• Sandscreens are the perfect choice for sanding dull and scuffed wood floors or those embedded with grit and grease.
• Choices of grit for just the right aggressiveness.
• The open mesh construction resists loading.

Packaging

• 60 grit, 17" - 0271017
• 60 grit, 20" - 0271019
• 80 grit, 17" - 0272017
• 80 grit, 20" - 0272019
• 100 grit, 17" - 0273017
• 100 grit, 20" - 0273019
• 120 grit, 17" - 0273517
• 120 grit, 20" - 0273519
• 150 grit, 17" - 0274017
• 150 grit, 20" - 0274019

Specifications:

• Inter-woven polyester knit backing with silicon carbide abrasive grain on both sides
• Open mesh for load resistance
• Rinse and reuse for longer sanding life
• Tends to cut more aggressively than paper or cloth

More Info:

• How to Screen Floors (pdf)

Directions:

• Refinishing wooden gym floors and racquetball courts at schools and/or sports facilities
• Preparing concrete, wood, and other floors for coating and recoating with typical sealers or finishes

1. Lay screen on floor
2. Place a red floor pad on top to use as a drive pad
3. Place a standard speed floor machine (175-300 rpm) with a the proper (balanced) pad holder on top of the pad and screen
4. Operate machine as normal

• Extreme liquid and dirt pick up
• Floors dry faster. Non-streaking
• Reduces bacteria by 90% compared to traditional mops
• Medium mops are green, Large mops are blue

• Increases performance and product life
• Greater floor coverage and control
• Prevents mop from tangling while mopping or laundering

• Easily attaches to most any conventional mop handle
• 5.5" headband fits standard mop handles, holders and frames
• Use with any standard mop bucket / wringer combination

Specifications:

• Washing your Microfiber mops

Mop Bucket and Wringer (splash proof) - The most popular Mop Bucket & Wringer Combo ever made. The WaveBrake mop bucket and wringer system reduces splashing, which means a safer environment, cleaner floors, and improved productivity. This revolutionary bucket shape with molded-in wave brakes inhibits wave formation, which greatly reduces splashing under typical usage. Wave reduction continues even when the Dirty Water Bucket is in place. The WaveBrake mop bucket and wringer system reduces splashing, which means a safer environment, cleaner floors, and improved productivity.

WaveBrake 35 qt. Yellow Mopping Kit Combo Includes:

• 7570, 35 quart Yellow mop bucket with 3" casters
• Premium tubular steel and structural web molded plastic.
• High Efficiency blue side press Wringer
• Tested to exceed 50,000 wringing cycles
• Accepts optional Dirty Water Bucket
• Optional: Dirty Water Bucket (red bucket)

Easy-Lift Handle

Heavy-Duty Spring

Rounded Edges

More Info:

Color Coded for Specialized Cleaning

WaveBrake Side Press and Down Press Combos are color-coded for easy separation of cleaning by room or area to reduce cross-contamination

The industry standard color-coding system includes;

• Red for high-risk areas such as toilets and urinals
• Blue for all-purpose cleaning, in other areas of a facility
• Green for food-service areas.

This extra fine white floor pad has been designed for polishing and cleaning delicate and highly-polished floors. Use dry or with restorative chemicals, to produce a wet look gloss to newly finished floors. A very soft non- abrasive dry polishing floor pad from low speed floor machine to high speed burnishers. This pad will polish to a high luster.

• The White Polishing Floor Pad is made of polyester fibers in a dense textured, non-woven pattern, bonded with a sturdy adhesive.
• The pad is used for spray cleaning or dry buffing soft finishes using a rotary machine (175-800 rpm). It is also used for light cleaning under an automatic scrubber.
• This extra fine pad has been designed for polishing clean, dry floors.
• White polishing pads are a perfect match when used to polish marble floors.
• Made from 100% recycled content

These white pads are equal to 3M 4100 super polish pads

Packaging

White floor pads are sold individually or in a case of 5.

Videos:

Specifications:

Available sizes:

• 13" - 0270113
• 14" - 0270114
• 15" - 0270115
• 16" - 0270116
• 17" - 0270117
• 19" - 0270119
• 20" - 0270120

More Info:

Recycled Content of Our Floor Pads (PDF)

Green Initiative used in our floor pads - Floor Pads with Enhanced Biodegradation
Our goal is to create products that perform to the highest standards while leaving the smallest possible impact on the environment. As s leader in the Jan/San industry for 45 years, our floor pads are made with 100% recycled fibers for well over a decade. We're now completing the cycle by introducing an innovative floor pad technology that has been specially formulated to biodegrade in a fraction of the time once discarded into a landfill, compared to conventional pads.

* When consumers see the Full Cycle label, they will know they have a quality product while reducing mankind's impact on the environment. Being good stewards of the environment is simply our corporate responsibility - and it’s what sets us apart from other manufacturers.

The Proof is in the Performance - For stripping, cleaning, polishing or burnishing, we have the pad. Only top quality materials go into our pads which result in top performance.

Directions:

General Use Directions:

1. Dust mop and clean floor surface. The Microfiber Fusion dust mop may be effectively used for dusting floor. Note: Buff only on a clean floor.
2. Install the White Polish Pad on a floor machine
3. Buff to a high gloss using overlapping passes.
4. Dust mop floor surface with a Microfiber Fusion dust mop may be effectively used for dusting floor.

Floor Pad Maintenance:

1. After buffing, if next buffing will be with same pad, leave pad on machine. Otherwise, remove pad and store.
2. Examine pad. Remove excessive dust and debris with a the center *"knock out"
3. Flip pad periodically.
4. Discard pad if thickness decreases to point where pad holder hooks extend completely through pad.

Floor Pad Tip:

Did you ever wonder what that small circular cut-out in the center of the floor pad is?

This little circular disk is used for cleaning the floor pad. Simply remove it and brush the entire surface of the floor pad (both sides) and re-insert it back in the center hole and re-use in the future.

Typhoon Diamond Discs are a high quality long lasting resin bond diamond polishing disc used to restore and polish a variety of stone floor surfaces. The Typhoon Discs may be used under a variety of floor machines, including single disc floor machines, hand held polishers as well as multiple head machines like the Cimex. The Typhoon diamond pads perform well on a variety of hard surfaces including Marble, Terrazzo, Limestone, Travertine, leaving a flat, highly polished surface.

• Typhoon Diamonds use the latest technology - Our most popular diamond disc.
• Average life of the Typhoon diamond discs ranges from 3,000-5,000 sq ft. depending on floor condition, density (hardness of the stone) and lippage (unevenness of the tile).
• Wider range of operating RPM's from 150 to 350
• Higher quality diamonds with multiple edges are used.
• Up to 3 times more diamonds per pad than competitors discs.
• The longest lasting resin bond diamonds you can buy.

Diamond discs are available in the following grits:

• Green, 50 grit #0652001
• Black, 120 grit #0652002
• Red, 220 grit #0652003
• Yellow, 400 grit #0652004
• White, 800 grit #0652006
• Blue, 1800 grit #0652007
• Gray, 3500 grit #0652008
• Purple, 8500 grit #0652009

Packaging

Videos:

Specifications:

Additional Information:

• 3 inch diamond discs are generally used with a floor machine.
• 4 inch diamond discs are normally used with a hand held polisher, for stairs, risers and perimeter floor work.

Backing: Velcro loop backing

Thickness: 10 mm

For Use On: Marble, Travertine, Limestone, Terrazzo

Equipment Used: Floor Machine

Usage:Wet

Our resin bond pads are designed for soft stone such as marble, travertine, terrazzo and limestone.

More Info:

These diamond discs have an order lead time of 3-5 days.

Directions:

We recommend using 5 or 6 discs on a diamond disc holder, placing the discs equal distance from one another.

• Easy to use and provides immediate results.
• Contains no lead
• Perfect for granite, gres and quartzite hard stones
• Easy clean up
• Coverage is approximately 300-400 sq. ft. per liter
• When used with a natural fiber polishing pad, one can achieve excellent results

More Info:

Recommendations:

Do not dilute the product with other solvents or water. Only in the case of an excessive drying of the product is it recommended to add water during the polish process.

In case of application of the floor with underfloor heating, turn off the heater and let the stone cool completely.

Before use read carefully recommendations printed on the package and perform a preliminary test.

Best results are achieved using a heavy weight machine, ideally in the range of 150-200 pounds.

Estimate Coverage

1 liter of Granite Polish Gel will treat 300-400 square feet per liter.

Directions:

Floor Application:

Surface Preparation:

Surface must be dry and clean. Wash the floor thoroughly with a floor machine and appropriate pad (green is suggested), eliminating dirt, residues of old floor finish and embedded soil (we recommend to use our pH Neutral stripper); rinse well and dry with a wet vacuum.

Place 1 oz. of Eureka Granite Polish Gel on the floor: place a standard speed floor machine equipped with a natural fiber floor pad on the product, moisten lightly, then work with the floor machine.

Spray or mist water on the floor in case Eureka dries too quickly during the polishing process. Afterspreading the product over the floor surface, work until complete drying of the gel has occurred and you have achieved the desired level of gloss.

Lastly, wash and rinse withwater and an alkali cleaner to remove product residue and to neutralize the acidity.

Countertop Application:

Surface preparation:

Surface must be dry and clean. Wash the countertop eliminating dirt, residues of old wax and treatments (we recommend to use our pH Neutral Stripper); rinse well and buff. Put a small amount of product .25 - 50 oz on the surface to be treated, moisten with few drops of water; proceed to polishing using an angle polisher with variable speed, equipped with white polish or orange automotive polish pad, speed rotation should be between 800-1500 rpm (1000 rpm is optimal).

Work the surface until complete drying of gel and achievement of result. Wipe off excess with water and neutral detergent. Above procedure can be repeated if necessary.

Q950 charging bucket with watertight lid - The ergonomic design makes for no bending or pulling while the molded-in grate helps prevent the over saturation of the microfiber pads. This bucket fits perfectly onto a janitor cart and can accommodate pads that are up to 18" in length

• Molded-in filling guide,1 quart per 5 microfiber pads
• Water tight lid
• Smooth, non-porous surface helps prevent bacterial growth and cleans up easily
• Buckets fit onto a standard size custodial / janitor cleaning cart
• Accommodates mops up to 18" in length

Directions:

Load pads into bucket, add solution, lock the lid in place, and shift the bucket from side to side to moisten the pads.

• Ideal protector for rubber, PVC, marmoleum, rubber studded, linoleum, nora flooring, and asphalt flooring. This low-odor finish has the flexibility needed to protect a synthetic floor.
• This synthetic floor finish is specifically formulated to work on rubberized flooring due to its elastic properties that will prevent cracking.
• Meets today's need for a product that contains no zinc or other heavy metals that can be harmful to wastewater treatment systems.
• This low-odor finish has the flexibility needed to protect a synthetic floor, while being tough enough to stand up to excessive wear that occurs on synthetic sport floors.
• EcoLogo Certified.

Packaging

More Info:

EcoLogo Certified EcoLogo is North America's largest, most respected environmental standard and certification mark. EcoLogo provides customers with assurance that theproducts and services bearing the logo meet stringent standards ofenvironmental leadership.

• Rubber, LVT & Marmoluem Floor Maintenance (pdf)
• Understanding Rubber Floors (pdf)

Directions:

• Apply a thin coat of elements Synthetic Floor Protectant and allow finish to fully dry. For best results use a micro-fiber applicator or a conventional finish mop.
• Coverage will depend on the porosity of the surface you are working on.
• 1 gallon of elements Synthetic Floor Protectant will cover 1200-1500 square feet of suitable surface.
• Repeat to a maximum of three coats, or until desired level of gloss is achieved.
• Please note, it is important that elements Synthetic Floor Protectant is applied in thin coats giving sufficient time - at least 30 minutes - between coats or hazing may occur.

• Ideal for use in a variety of cleaning tasks.
• Rubbermaid 2628

• Helps reduce cross contamination