Compare

Encapsulating Carpet Cleaner, Carpet Cleaning Polymer remove Heavy Duty Push Brooms, Palmyra Fiber Brushes remove Ultra Fine Bristle Push Broom for Sweeping Fine Dust remove

Image

SKU COREHPCCC128 BWK20118 5196436

Rating

0 out of 5

Price $40.49 Per Each $22.34 – $41.06 Per Each $27.70 – $48.63 Per Each

Stock

Available on backorder

Availability Available on backorder Available on backorder Available on backorder

Add to cart

Select options This product has multiple variants. The options may be chosen on the product page

Description

A low-moisture encapsulation carpet detergent for commercial carpet care. Hydroxi Pro Carpet Cleaning Polymer 6-in-1 concentrated formula combines the cleaning and deodorizing power of Hydrogen Peroxide with the anti-resoiling capabilities of an encapsulating polymer. This unique formulation helps reduce contamination associated with indoor pollution without the build-up of sticky residue or high V.O.C. solvents. The result is a process that leaves your carpet cleaner than ever and fights re-soiling by encapsulating residual cleaning agents and soils in a hard, brittle polymer.

Green Certified (EPA Design for the Environment Approved)
HydrOxi Pro Encapsulating Carpet Cleaning Polymer
Gallon container
Sold each or by the case of 4

Palmyra Fiber Heavy Duty Push Brooms are specifically designed for moving heavy debris. These brooms are excellent for use in shops and for construction cleanup.

Ideal for use outdoors where surfaces tend to be coarse.
The palmyra bristles create a coarse sweep making this the best choice for heavy duty cleanup tasks.
Two threaded handle holes for even bristle wear.

Many brooms have "flagged" bristles which contain split ends that decrease stiffness and add dust retention properties. This soft, synthetic fiber is ideal for dusting and fine sweeping.

Hardwood block with flagged gray polypropylene bristles
Designed for use when sweeping fine particles on smooth floors
Ultra-fine bristles will not scratch smooth surfaces
Available in 18, 24 and 36" widths

Content

Encapsulating Carpet Cleaning Polymer - When the carpet cleaning polymer dries it forms one of the best releasing crystals in the industry. A brittle crystal is produced that can be extracted from the fiber with routine vacuuming.

Deodorizes while you clean
Natural orange fragrance
Anti-resoiling & Color-safe
Neutral pH for synthetic and natural fibers
Safe for use as an Extraction Cleaner
Traffic Lane Pre-spray
Spot & Stain Remover
Spin Bonnet
Deodorizer
One product for all your carpet cleaning needs

Carpet Cleaning Polymer Can Be Used in Many Applications:

Cimex
Cylindrical brush
Rotary
Pad cleaning
Bonnet/pad
Spot cleaning

Directions:

There are four Carpet Cleaning Methods To Choose From

Method 1: Encapsulation

Measure 10 oz. of Carpet Cleaning Polymer and pour into a pump-up sprayer. Fill with hot water, mix, and build up compression.
Begin by heavily spraying traffic lane areas such as doorways, hallways, elevator areas, break room/food service areas, main entryways, or any spots and stains, and all areas that appear darker than normal.
Next, saturate the entire area to be cleaned with the 10-oz-per-gallon solution. Agitate by raking two directions, pushing the carpet rake forward in long strokes, then cross-raking the opposite direction. This raises the pile and allows better penetration of the solution.
Wait ten (10) minutes, then extract with clean, hot water. With Carpet Cleaning Crystal there is no reason to use additives for deodorizing, brightening or de-foaming because it is all built into this unique formula.
Dry the carpet using an Air Mover, floor fans, open windows or turn on HVAC units to the FAN ON position.

Method 2: Normal Extraction: Add 2 oz. per gallon of Carpet Cleaning Polymer to your solution tank and fill with hot water. Extract as normal. Since you do not use a pre-conditioner or agitation with Method 2, overall cleaning will not be as effective as Method 1. Method 3: Bonnet / Pad Cleaning: (Low-moisture system) Mix Carpet Cleaning Polymer at 10 oz. per gallon of water. Soak bonnet, removing excess solution. Lightly pre-spray carpet, allowing 10 minutes dwell time, then bonnet clean, as normal. A clean mop bucket and wringer works well here. Method 4: Dry Agitation Cleaning: Mix Carpet Cleaning Polymer at 10 oz. per gallon of water. Pre-spray carpet (400 sq. ft. per gallon of RTU dilution) that's a 20' x 20' area. Agitate into the carpet with a carpet rake in two directions. (For best results, agitate with a counter-rotating brush action, let carpet area dry for 24 hours and vacuum thoroughly.) Spotting: Mix Carpet Cleaning Polymer 10 oz. per gallon of water. Soak problem area with solution. Agitate with carpet brush or rake and allow 5-10 minutes dwell time. Blot excess liquid with a clean, absorbent cloth. For tough, stubborn stains, repeat application procedures. Heavy Browning Area: Mix Carpet Cleaning Polymer at 20 oz. per gallon of water and pre-spray browned areas thoroughly followed by extraction with clean water. Use ceiling or portable fans to dry treated areas quickly.

Palmyra Fiber Push Broom Heads are composed of a hardwood block with natural palmyra fibers. The palmyra fibers create a coarse and heavy sweep making it a versatile brush for sweeping heavy debris. All brooms are made with a 3.5" bristle trim length. The two threaded handle holes allow for bristle alternation which increases the longevity of brush bases.

Available broom sizes:

18 in. #BWK 20118
24 in. #BWK 20124
36 in. #BWK 20136

**All broom handles are sold separately, we highly recommend a metal tip handle.

Parish-Supply.com - The janitorial supply company customers trust.

Packaging

Push broom heads and handles are sold separately.

Videos:

Specifications:

Palmyra Fiber Heavy Duty Push Broom Specifications

Construction: Wood block

Bristle Length: 3.5 in.

Bristle Color: Brown

Bristle Type: Palmyra fiber

Handle Connection: (2) 1/2 acme thread

More Info:

Directions:

These Polypropylene Push Brooms are composed of a hardwood block with gray polypropylene bristles. The polypropylene bristles are flagged for sweeping dust and fine particles on smooth surfaces. The two threaded handle holes allow for bristle alternation which increases the longevity of brush bases. All brooms are made with a 3" bristle trim length. Fine bristles are excellent for use on smooth surfaces in indoor locations. Available sizes

18 in. BWK 20418
24 in. BWK 20424
36 in. BWK 20436

**All broom handles are sold separately. We recommend a metal tip handle. Parish-Supply.com - The janitorial supply company customers trust.

Packaging

Videos:

Specifications:

Polypropylene Fiber Push Broom Specifications Construction: Wood block Bristle length: 3 in. Bristle color: Gray Bristle type: Flagged Polypropylene Bristles Handle connection: (2) 1/2 acme thread

More Info:

Directions:

Weight N/A N/A N/A

Dimensions N/A N/A N/A

Additional information

Available Options	FLOOR BRUSH HEAD, 3 1/4" NATUR AL PALMYRA FIBER, 18" (1 Each), FLOOR BRUSH HEAD, 3 1/4" NATUR AL PALMYRA FIBER, 24" (1 Each), FLOOR BRUSH HEAD, 36" WIDE, PA LMYRA BRISTLES (1 Each)

Available Options	FLOOR BRUSH HEAD, 18" WIDE, FL AGGED POLYPROPYLENE BRISTLES (1 Each), FLOOR BRUSH HEAD, 3" GRAY FLAG GED POLYPROPYLENE, 24" (1 Each), FLOOR BRUSH HEAD, 3" GRAY FLAG GED POLYPROPYLENE, 36" (1 Each)