Compare

This intuitive high-speed hand dryer dries hands in 10 seconds. Users dry their hands in a natural, comfortable position without water splash-back. The iStorm utilizes water absorbing ceramic technology eliminating water overflow preventing hazardous wet floors.

The iStorm has an airspeed adjustment, on-off heater switch, and dual-color LED sensor indicators for a superior hand dry. The iStorm hand dryer is the fastest way to dry hands. It is suitable for all restrooms, particularly where sound levels are an important consideration.

Hand Dryer Features:

• Incredible 10-15 second dry time
• Ergonomically designed, this reduces uncomfortable bending
• Water absorbing ceramic backsplash prevents wet floors and water damage
• Super 3-layer HEPA filter eliminates over 99% of airborne bacteria
• Adjustable airspeed for custom settings to maximize efficiency
• Antibacterial coating reduces the ability for micro-organisms to grow
• On/Off switch for heater so air temp is appropriate for all climates
• 5 Year Limited Warranty

Packaging

Videos:

Specifications:

iStorm 2 Hand Dryer Specifications

Cover Construction: Polycarbonite

Available Colors:

• White #0749400
• Platinum # 0749401
• Black #0749402

Circuit Operation: Infrared automatic

Sensor Operation: Touchless- Automatically shuts off when you remove hands

Timing Protection: 60 sec. auto shut off

Sound Level: 65 decibels

Air Flow: 76 cfm

LED Light: Standby = Red, Active = Blue

Decibels: 66 dB

Thermal Protection: Auto resetting thermostat turns unit off at 210 degrees

Drying Time: 10-15 seconds (average)

Electrical Power

Voltage: 120 volts, 50/60 hz, AC

Amp Draw: 15 amp (1800 watt - 700 waay with no heat)

Isolation: Class I

Dimensions

Width: 12 3/4 in.

Height: 24 3/4 in.

Depth: 7 1/4 in

Weight" 24 lbs.

Warranty: 5 year

Suggested Mounting Height: 14 - 26 in.

Filtration: 3-Layer Filtration System (HEPA filter, carbon filter, anti- microbial filter)

More Info:

• iStorm Operator's Manual (pdf)

The iStorm 2 high speed hand dryer with an incredible 10 second dry time, users dry their hands in a natural comfortable position without water splash-back. The iStorm 2 utilizes water absorbing ceramic technology, which eliminates water overflow and prevents hazardous wet floors. The iStorm 2 includes an airspeed adjustment, on-off heater switch, and dual-color LED sensor indicators for a superior hand-dry.

Unlike competing high speed hand dryers, the iStorm 2 blows air down and away from the user, instead of back at user and on the floor, resulting in much safer restroom conditions.

The iStorm 2 utilizes ergonomic design, making it the most efficient and user friendly high speed hand dryer on the market. Users dry their hands just like they wash them - no uncomfortable bending.

Directions:

Cleaning and Maintenance

Periodic cleaning and maintenance of the unit is recommended to ensure optimum performance.

• Wipe the cover with a damp cloth and mild cleaning solution
• Do not soak, Do not hose down
• Never use abrasives to clean the cover. Caustic chemicals may damage the units' finish
• No internal parts need any regular cleaning

Operation

1. Put your hands through the opening
2. Dry hands in a motion like you are washing them
3. Remove hands and the dryer will stop automatically

The Side-Gate quick change wet mop handle is the fast and easy tool used to mop floors. The Side-Gate wet mop handle makes changing mop heads easy as it allows you to quickly slide them on or off. A locking thumb wheel enables a stress-free, tight and secure clamp down for use with 1" wide or larger headband wet mops.

• Handles locked-in antimicrobial agent protects against bacterial growth.
• Plastic head w/ 60" aluminum handle.
• Exclusive quick-change one-piece yoke holds mops 8-36 ounces mops.
• Thumb wheel clamps mop head in place.
• Fits narrow or wide headband mops.
• Injection molded head is non-marking, no-slip grip head.

Its 60" long yellow powder-coated handle offers maximum comfort during use. For fast and easy mop changes, its convenient side release allows your mop to effortless slide off without the mess.

Battery Powered Sprayer Features:

• Viton and EPDM seals are used in the Hose, Wand, Trigger Valve
• Backup Manual Pump (if needed to complete the job)
• Chemical Resistant Hose
• Wand holder
• On/Off Switch
• Connection Knob
• Battery Power Level Indicators
• User Replaceable Power Cells
• Built in Drip Cup

• This results in a full day of spraying on a single charge.

More Info:

Directions:

• Rotate the knob to remove the Power Pack while the tank is still under pressure if needed

• ✔ Antibacterial protection – Contains 0.3% PCMX to kill common germs
• ✔ Moisturizing formula – Enriched with Aloe Vera and Vitamin E
• ✔ Eco-friendly design – Boxless bag reduces waste
• ✔ Fresh citrus fragrance – Leaves hands smelling clean
• ✔ Compatible with 800ml dispensers – Use with models 9950ZPL, 9951ZPL, 9952ZPL, 9953ZPL

The Cleaning Clamp pole attachment gives you the flexibility to create several cleaning tools all with one attachment. It quickly grips sponges, cleaning clothes, brushes, or a variety of other handheld cleaning tools simply by tightening the easy locking collar.

Cleaning Clamp Features:

• Becomes a high-rise cleaning tool to solve many cleaning problems without climbing ladders
• Injection molded plastic
• Innovative design quickly grips many cleaning accessories
• Fast lock, press-fit socket
• Attaches to any tapered pole, including telescopic poles and tapered wood handles

• Quiet operation requires two AA batteries (not included).
• Compatible with general purpose and restroom cleaners, disinfectants and bleach.
• Adjustable spray from fine mist to stream
• Lightweight, one hand operation
• Multiple position spray means the bottle can be tilted while spraying. Draw tube has weighted tip and filter. As long as weighted draw tube stays in the liquid, it will continue to spray.
• Attractive translucent bottle constructed of durable polyethylene plastic
• Safety lock prevents chemical from sprayed when not in use
• 1000 mL (33.8 oz) capacity
• Two AA batteries (not included) provides 15 cycles (15 refills)

The Pocket Style mop holder system is designed to allow the user to place the mop head on the frame and remove to the laundry with No Handling of the soiled mop. The microfiber mops are secured to the frame by two pockets and a clip. The frame is 'broken' by pressing a button with the foot and the mop remains attached until a small clip is released.

• Pocket mop frame is molded and not attached with glue or rivets.
• No worries about the velcro strips falling off or filling up with mop fibers found in ALL "Peel and Stick" flat mop holders.
• Durable, ultra-light construction reduces user fatigue.
• Offers a "no-touch" solution for securely attaching and removing mops after use.
• A real time saver for all areas of floor surfaces - can also be used for cleaning walls.
• Foot operated release lever folds the frame which allows you to quickly change heads effortlessly.
• Color coded cleaning heads available (sold separately)

Telescoping Aluminum Handle with Gray Grip (sold separately)

• Aluminum telescopic handle (48" - 72") Gray comfort grip
• Part #19015

Packaging

Videos:

Specifications:

Pocket Style Folding Flat Mop Frame specifications

Built-in swivel: Yes

Frame length: 16 in.

Frame width: 5 in.

Telescopic Aluminum Handle specifications

Material: Aluminum

Diameter: 15/16 in.

Telescopes: From 48" - 72"

Rubber comfort grip: Yes

More Info:

Directions:

• Step By Step Instructions (pdf)

1. Fill solution bucket with a proper cleaner or disinfectant detergent.
2. Place mops microfiber side face down in clean bucket (orange).
3. Pour solution back and forth over mops.
4. Place lid on bucket, making sure seal snaps in place on all 4 corners.
5. Flip bucket over and let it sit for a minimum of 10 minutes place on 4 corners.
6. Place bucket on trolley along with dirty bucket.
7. Collapse frame by pressing button, line up edges of frame in front of opening of pockets and press firmly to "snap" frame into mop.
8. Clean the floor.
9. Hold mop & frame above waist level, push button on frame to release bottom of mop. Place mop and frame in dirty bucket and pull frame away leaving the dirty mop in bucket.

*On average - a pre-treated flat mop has the capability of cleaning between 500-750 square feet of flooring before it's time to either re-treat or place in the discharge bucket. For healthcare facilities it's a recommended practice to use one mop per room. This greatly reduces any change of cross contamination.

Features of the charging bucket:

• Mops can be left or stored in the charging bucket until you're ready to use them.
• Designed for use with microfiber flat mops.
• Ideal for healthcare and school classroom cleaning.
• The smooth, nonporous surface prevents bacterial growth and cleans up easily.
• Durable, lightweight plastic construction.
• 6 gallon bucket accommodates mop pads up to 19" long.
• 3 gallon bucket accommodates mop pads up to 10" long, or microfiber cleaning cloths.

The pre-treat charging bucket uses less chemical solution - Just 1.5 gallons of ready-to-use solution charges 25 , 18” mops. 

• Hands-free system - no hand-wringing.
• The system allows you to quickly attach and remove mop heads with no touching or wringing.
• Save energy - skip the dry cycle - after washing, just load the mop heads into the charging bucket.
• For use with the (pocket-style) Microfiber flat mop pads.

Packaging

Videos:

Specifications:

Charge & Discharge Microfiber Bucket Specifications

Bucket Capacity: 3 or 6 gallons

Flat Mop Capacity: 25 microfiber flat mops

Colors: Orange (for clean mops), gray (soiled mops)

Lids: Included & watertight, color coded to match bucket

Graduation Marks: Built-in graduation marks on the inside of the bucket (in liters and gallons)

Dimensions

Outside Width: 12 3/4 in., 21 in.

Inside Width: 11 1/2 in., 19 in.

Depth: 10 1/2 in.

Height: 12 in.

Carry Handle: Yes

More Info:

Directions:

• Step By Step Instructions (pdf)

1. Fill solution bucket with a proper cleaner or disinfectant detergent.
2. Place mops microfiber side face down in clean bucket (orange).
3. Pour solution back and fourth over mops.
4. Place lid on bucket, making sure seal snaps in place on 4 corners.
5. Flip bucket over and let it sit for a minimum of 10 minutes on 4 corners.
6. Place bucket on trolley along with dirty bucket.
7. Collapse frame by pressing button, line up edges of frame in front of opening of pockets and press firmly to snap frame into mop.
8. Clean the floor.
9. Hold mop & frame above waist level, push button on frame to release bottom of mop. Place mop and frame in dirty bucket and pull frame away leaving the dirty mop in bucket.

*On average - a pre-treated flat mop has the capability of cleaning between 500 -750 square feet of flooring before it's time to either re-treat or place in the discharge bucket. For healthcare facilities it's a recommended practice to use one mop per room. This greatly reduces any chance of cross contamination.

Aluminum mop handle for the Unger folding mop frame This Unger mop handle is constructed of lightweight aluminum with an ergonomic grip that makes it easy to clean throughout your entire facility. The flat mop system is very easy to maneuver through hard to reach areas with this lightweight handle. It has a three section assembly measuring 53 inches long, and is 15/16 inch in diameter to fit the Unger folding flat mop holder.

• Designed for use with the Unger Folding Flat Mop Holder
• 15/16" diameter
• Secure to mop holder with E-Ring (e-ring included with mop holder)
• For use with your Unger Double Bucket mop System
• Unger MS14G

More Info:

This handle features a convenient three section assembly that easily slides together and allows for compact storage when not in use.

• Dries hands completely in 14 seconds
• Automatic (hands free) activation promotes hygiene
• Surface-Mounted design
• Long Lasting - Backed with a 5 Year Limited Warranty
• Variable speed and heat settings for increased energy savings
• Adjustable Speed and Sound Control
• Multi-Voltage Options: 110-120 volts & 208-277 volts
• Adjustable Heat Settings - High, Medium, Low & Off
• Externally Visible Service LED

Quantity Hand Dryer Recommendations: One dryer for every two wash basins is sufficient for most applications. If restroom traffic is unusually heavy, we suggest one dryer per wash basin in small installations and two dryers for every three wash basins in larger installations. When a 54" wash fountain is used we suggest four to five dryers.

• Backed by the most extensive, hassle-free warranty including 5 year warranty on parts & motors (1 year on vacuum motor).

A strong sealed, all gear transaxle permits climbing steep ramps, and while heavy duty, chemical resistant tires are standard equipment. The drive tires and caster wheels are oversized, which permits better clearance and navigation of obstacles. Quickly remove and replace brushes and squeegees. Plus, with the "no hassle" squeegee system, there are no tools for maintenance and the blade is set at the optimum recovery angle.

Standard Features Included on all Fang Scrubbers:

• 215 AH battery pack (2 x 12 volt batteries)
• Trojan brand batteries (premium deep cycle)
• Automatic 25 amp charger
• Battery condition gauge
• Brush pressure control
• Foam shutoff
• Electric actuator for brush head
• Variable speed (forward & reverse)
• (2) Pad holders
• Non-marking drive wheels and caster wheels
• On-board spare squeegee blade

The F26 & F28 are supplied with (2) 215 amp batteries (Trojan brand) (1) battery charger & (2) pad holders

• ✔ Powerful dust pickup – Picks up more particles in less time
• ✔ 100% microfiber pad and fringe – Better lint control and particle capture
• ✔ Fringe extends reach – Cleans wider areas more efficiently
• ✔ Reusable and washable – Withstands up to 500 laundry cycles
• ✔ Universal fit – Compatible with any standard microfiber frame

Effectively cleans stainless steel, porcelain enamel, iron, undercoated ceramic tile, concrete, and glass. Use Break-Up (Mr. Muscle) on ovens, including doors, fronts, windows and racks, broilers, ventilation hoods, splash panels, steam table-tops, pots, pans, fryers and griddles.

Keep your grill and oven sparkling clean with this effective oven cleaner.  This powerful foam boasts the strength and versatility needed for heavy duty cleaning in the toughest applications, allowing it to work instantly on cold or hot surfaces up to 180 degrees F.

Intended for Easy Use with Self-Scouring Action

The foam clings to the surface on contact, breaking down tough, baked-on grease and grime. Excellent for quick 30-minute cleanups. Formula works immediately on warm or cold ovens. Break-Up (Mr. Muscle) oven and grill cleaner provides powerful cleaning action for even the tougher jobs. The time-lapse action of this foam cleaner makes those hard-to-clean jobs much easier.

• Excellent choice for stainless steel, porcelain enamel, iron, glass, and other surfaces.
• Self-scouring action for less scrubbing and no scraping.
• Break-Up (Mr. Muscle) oven & grill cleaner aerosol contains no CFCs.
• Attacks grease and grime on ovens, grills, fryers and more.
• Extra power to clean away even carbonized soils.
• Emulsifies the baked on grease, food and spills, which allows you to simply wipe it away with a damp cloth - no scraping required.
• Leaves your appliances and surfaces sparkling clean.
• Kosher and Pareve approved.

Packaging

Break-Up oven cleaner is sold each or by the case of 6

Videos:

Specifications:

Break-Up Oven and Grill Cleaner Specifications (formerly Mr. Muscle)

Physical State: Liquid (Aerosol)

Appearance: Aerosol Foam

Odor: Citrus

Color: Tan

pH: 13.0

Foam Action: High

Solubility: Complete with water

Container Size: 19 ounce

More Info:

Directions:

Do not use on hot surfaces above 180 degrees F

Do not spray on or let spray contact pilot light, electrical connections, switches, light bulbs, heating elements, receptacles or thermostats.

Do not let product contact floor coverings, linoleum, aluminum, copper, chrome, painted surfaces or plastics.

Do not use on continuous or self-cleaning ovens.

Shake container well and often.

Follow instructions on cap.

Hold container upright and spray 9-12 inches from oven walls and away from face.

Allow foam to work 30 minutes to 2-4 hours. Wipe clean with wet sponge or paper towels

• ✔ Extended Cup Design – Creates a tighter seal to maximize pressure
• ✔ 19" Metal Handle – Non-absorbent, more sanitary than wood
• ✔ Heavy-Duty Force – Dislodges even the most stubborn clogs
• ✔ Space-Saving Storage – Lip recesses for compact storage
• ✔ Durable Construction – Built to handle frequent use in demanding environments

The Porta Roll dispenser delivers 940 feet (total length) of quality 2 ply tissue for continuous service and increased customer satisfaction. Featuring a transfer door to prevent access to a new roll before the current roll is completely used up, this dispenser offers one of the most cost effective solutions for high capacity toilet paper dispensing.

• Lockable dispenser
• Side By Side Roll bath tissue dispenser
• Maximum tissue in minimum space
• The sleek, small design allows for installation in small spaces
• Continual availability of paper provided by eliminating stub roll waste
• Manage usage: A transfer door prevents access to a new roll before the current roll is used up
• Tough polycarbonate cover is vandal proof, break resistant which makes this the most reliable dispenser

The small size also reduces the chance of the dispenser being damaged by patrons or doors in cramped stalls. Polycarbonate cover with key lock also helps to prevent pilferage in higher traffic restrooms.