Compare

The BD-26 rider floor scrubber cleans large and small environments safely and productively, maintain and renew hard floor surfaces faster than ever before. The Tornado's 26" Ride-on Automatic Scrubber increases cleaning productivity in areas where walk-behind scrubbers were used in the past, thanks to its compact footprint and great maneuverability. Micro-rider leaves just-scrubbed floors left immediately clean, dry, and safe for traffic.

Tough, Long-Lasting Floor Scrubber

Healthier Buildings

• Compact Low-Profile - This highly maneuverable unit reaches difficult areas previously cleaned by larger ride-on scrubbers.
• Easy Access to Tanks and Batteries For easy maintenance, gain access to batteries by simply lifting the seat.
• Parabolic Squeegee - Heavy duty assembly featuring a four-sided rear blade with quick release lever to facilitate squeegee changes in 10 seconds or less.
• Silent Supervisor - Easy-to-read control panel displays battery run time and charge indicator, maximizing your team's cleaning efficiency and protecting your investment.

Disc Pads and Brushes - The BD unit comes standard with pad holders. When used with the appropriate pad, this is the ideal solution for daily maintenance cleaning. The BD-26 machine can be fitted with a variety of optional scrub brushes.

Microfiber floor finish bucket is the perfect, portable bucket is used to apply conventional water based floor finishes. The five gallon capacity bucket holds enough floor finish to coat 6,000 square feet before it's time refill. With the built-in washboard strainer on top, it's designed to remove excess debris and finish from flat mop - without transferring dirt back onto the floor.

Need to take a break between coats - no problem, simply snap the lid on the bucket and preserve your finish for hours.

• Easy to clean interior
• Wheels make it very easy to move
• Small size keeps it lightweight
• Drain valve allows finish to be emptied without having to lift the bucket
• Color-coded blue to visually differentiate use.
• Perfect for tamping excess finish from Microfiber flat mops.
• Smooth, non-porous surface makes it easy to clean

**Not for use with oil base / solvent based finishes.

• Attaches directly to the Kaivac spreader frame
• Gently agitates the floors surface
• Safe on all floor surfaces

The Alpha VSP (variable speed polisher) Wet Polisher has new features to perform above and beyond your expectations. The VSP-320 includes a variable speed control switch with an automatic speed feed-back system to maintain consistent RPMs with or without a load.

The switch has also expanded the usable RPM range from 700 RPM to 2,800 RPM. The RPM range reduces heat build-up when polishing Engineered Stone, which eliminates burning or scorching the work piece. We added a Splash Guard that can be trimmed to adjust the height for the best comfort and protection. Every stone fabricator should try the VSP-320 variable speed wet polisher to achieve the best performance and high quality results.

Note: Please order the proper size backer pad, available in 3", 4" & 5" diameter. The backer pad is required, it's used to connect the diamond polishing discs to the polisher.

Included with each Hand Held polisher / grinder:

• Ground fault circuit interrupter (GFCI)
• Water valve & 15' feed hose
• Faucet / Garden hose adapter
• Wrench
• Side handle (reversible)
• Extra carbon brush set
• Splash guard
• Carrying case

The variable speed is the best all around polisher for use on floors, stairs, treads and risers.

Packaging

Videos:

Specifications:

Variable Speed, Hand Held Polisher Specifications

Voltage: 110/120 volts

Amps: 7.0

Power: 800 watts

Power cord: 10 feet

Speed (rpm): 700 - 2800 rpm

Hose length: 15 feet

Weight: 7.3 lbs.

Spindle: 5/8" x 11

More Info:

The major upgrade of the new 320 came in the form of the heavy-duty gear systems that includes the step-down transmission and a bevel and pinion gear to produce the variable speed range of 700 to 2,800 rpm.

• 15 ft. water supply hose
• Adjustable splash guard
• 15 ft. power cord

Directions:

The Easy Gloss System is a floor finish applicator designed to make floor finish coating faster and easier, while eliminating waste. The system features a lightweight applicator, convenient backpack and a microfiber applicator pad.

• Lightweight durable handle with finger tip dispense control.
• Padded backpack with adjustable straps for personal fit.
• Easy mounting applicator pad system.
• 1.5 gallon floor finish pouch included

Easy Gloss refillable 1.5 gallon bags are sturdy, reusable, and easy to fill and install. Bags can be filled with virtually any floor care chemical. Max liquid volume is 1.5 gallons. Under normal use conditions the pouch can be filled and reused up to 30 times.

*Not for use with oil base floor/wood finishes.

Easy Gloss Applicator Features

• Heavy Duty Canvas Backpack
• Ergonomically designed with padded, shoulder straps that are adjustable for desired fit

Refillable Floor Finish Bags

• Easy to fill and install
• Bags can be filled with virtually any non-acid floor care chemical
• 1.5 gallon capacity

Anodized Aluminum Handle - 56.5 inch

• Corrosion and shock resistant
• Lightweight

Swivel Trigger Operated Fluid Dispenser

• Allows quick and easy fluid dispensing
• Continuous flow when the valve is depressed
• Dual outlet dispenses fluid at a 90 degree angle - eliminates liquid collecting on the mop frame
• Swivel trigger moves with natural movement of operator making it more ergonomic.

Unique Frame Design

The 16" Cling-On molded flat mop frame with quick connector has molded-in spikes - the mop pad clings to the frame (no hook and loop strips) - and holds your mop pad firmly in place. Addresses ongoing nuisance issue of having to replace velcro strips that accumulate fiber and causes the frame to lose its grip on the mop.

Packaging

Easy Gloss Floor Finish Applicator Kit Includes:

• 56.5" Applicator handle
• 16" Nylon applicator pad holder - New
• Padded backpack with adjustable straps
• 18" applicator pad
• 7' supply tubing with pouch connector
• One refillable pouch (1.5 gallon capacity)

Videos:

Specifications:

More Info:

The 5' clean out fitting is a great option when a pressurized cleaning is necessary. Fits most standard faucets in commercial janitor sinks

• *Clean out fitting is an optional accessory
• Part #: 0354561

Specially designed filling station allows use of most water base floor finishes and many other cleaning chemicals such as neutral, general purpose, and disinfectant cleaners.

Refill stand kit is an optional accessory

The Refill Station Stand can be affixed to most flat surfaces (optional)

Using the funnel fill makes it easy to use in almost every cleaning environment.

• Simple funnel fill system
• Part #: 0354555

Directions:

Easy Gloss Floor Finish Applicator System

1. Prepare floor surface for coating.
2. Using the trigger at the top of the handle, depress to dispense a 4" puddle of floor finish onto the floor surface.
3. Applicator system will utilize the same application approach as conventional floor finish mop. Move applicator pad into the "puddle" to load the pad for initial use.
4. While moving applicator to new floor areas, dispense finish periodically and use U-shaped motion (section applications) as with conventional floor coating procedures.
5. Move at an even, uniform pace. Keep floor finish applicator pad uniformly wet with floor finish for proper coverage from one section to another.

This pen-sized sample collection device is easy to use, small, and environmentally friendly. In addition, UltraSnap uses a unique liquid-stable reagent providing superior accuracy, longer-lasting signal strength, and more reproducible results. Ultrasnap is a user-friendly, self-contained ATP sampling device used with the SystemSURE II. It contains a unique liquid-stable reagent in place of the freeze-dried enzyme pellet used in other ATP sampling devices. This new technology provides better accuracy, longer-lasting signal strength and more reproducible results.

Benefits of the ATP UltraSnap Swab:

• Pre-wetted swab maximizes sample recovery and breaks through biofilm
• Sample can be collected and stored for up to 4 hours before activation
• Unique liquid-stable reagent gives superior sensitivity and reliable results
• 100% recyclable plastic
• 15 month shelf life at refrigerated temperatures (36-45 degrees F)
• 4 week shelf life at room temperatures (69-77 degrees F)
• Results in 15 seconds
• Consistent, reliable results
• Pre-moistened swab bud
• Self-contained, liquid-stable reagent
• Write-on swab label for easy sample identification
• Snap-Valve technology (snap & squeeze)
• Tolerant to temperature abuse
• Test wet or dry surfaces

Specifications:

Question: What is ATP?

Answer: Adenosine Triphosphate, or ATP, is the energy molecule found in all living things, making it a perfect indicator when trying to determine if a surface is clean or not. Companies use ATP systems to rapidly verify surfaces have been cleaned thoroughly in food manufacturing and healthcare applications, and to ensure that biofilms (soil load) are not developing on the surface that could affect quality.

With an ATP hygiene monitoring system, ATP is brought into contact with the unique liquid-stable reagent in the test device. Light is then emitted in direct proportion to the amount of ATP present in the sample, providing information on the level of contamination in seconds.

Shelf-Life:

• 15 months at refrigerated temperatures (36-45 degrees F)
• 4 weeks room temperature (69-77 degree F)

Packaging

• UltraSnap swabs are packed 200 swabs per case.
• All swabs are shipped via 3 Day Air in a container packed in dry ice