| Description |
- Designed with two holes, one angled and one upright - this Lobby Broom makes cleaning easy.
- The angled feature helps maneuver the broom more easily around and under tight spaces, as well as maintaining comfort for the operator.
- Makes a perfect companion for use with Lobby Dust Pans
- Sold each or by the case of 12
|
- All purpose screen discs for wood and concrete floors
- Average life of a screen discs when used on a wood floor surface is 300 - 400 square feet using both sides
- Average life of a screen disc is between 100 - 150 square feet per disc when used on concrete using both sides
- Available in 60, 80, 100, 120, 150 grit
| Value loop green wet mops offer high performance and durability for general purpose floor cleaning, floor stripping, and finishing. Unlike cut end disposable mops, looped end mops won't fray or unravel with use, which helps lower replacement costs and delivers increased performance.
- 4 ply, looped end, cotton / acrylic / rayon blended yarn
- The tailband provides wide surface coverage - mops evenly without leaving gaps
- Lasts up to 8 times longer than cut end mops
- Available in Medium and Large sizes
- Fits all types of mop handles from clamp type to side gate handles
- Sold each or by the case of 12
|
| Content | This Lobby Dust Pan Broom is the perfect size for use in tight, hard-to-reach areas for continuous maintenance or periodic cleaning. The 28" long handle makes this broom a natural for use with a lobby dust pan in malls, theaters, convention centers, office buildings, and other busy areas where a clean appearance is important.
- Split-Tip 4" long synthetic bristles
- Painted steel handle holds up to rigorous use
- Overall length 34"
- Two handle holes; one angled, one upright
- Lobby/Angle Brooms
- Blue-flagged bristles
- Made for sweeping fine debris
Ideal for cleaning under furniture, fixtures, and other hard-to-reach areas. Tough polypropylene with flagged bristles model helps trap fine dirt particles. | Sanding Screens (Screen Discs) - Mesh screen disc with strong fiber, uniform open construction and consistent cut from start to finish. Sanding Screens are an open mesh fabric heavily coated with silicon carbide abrasive. Its durable, open weave mesh design is non-loading and coated on both sides for longer lasting reversible wet or dry use. Sanding Screens are available in a number of different mineral grades: 60, 80, 100, 120 and 150 grit.
- For refinishing wood gymnasium floors and racquetball courts at schools and sports facilities.
- For preparing wood, concrete or other floors for coating or recoating using conventional sealers or finishes.
- 60-80 grit screens are often used for the removal of concrete coatings while the 100-150 grit are generally used for wood floor preparation.
- Average life expectancy for screen discs when used on wood floors is 300-400 square feet per disc.
- When used on concrete floors coverage will vary from 100-150 square feet per disc.
- For use with conventional floor machines.
- Fast action wood floor refinishing.
- Sandscreens are the perfect choice for sanding dull and scuffed wood floors or those embedded with grit and grease.
- Choices of grit for just the right aggressiveness.
- The open mesh construction resists loading.
Screen Tip:
Screens can be rinsed and reused to prolong sanding life. Rinsing the screens removes any debris or build up in the screen, exposing a fresh cutting surface. Always place a RED pad between the screen disc and the pad holder.
Packaging
Screen discs are sold individually or 10 screens per case.
Screen Discs are available in the following sizes listed below.
- 60 grit, 17" - 0271017
- 60 grit, 20" - 0271019
- 80 grit, 17" - 0272017
- 80 grit, 20" - 0272019
- 100 grit, 17" - 0273017
- 100 grit, 20" - 0273019
- 120 grit, 17" - 0273517
- 120 grit, 20" - 0273519
- 150 grit, 17" - 0274017
- 150 grit, 20" - 0274019
Specifications:
Our screen discs are used to sand floors between coats of finish to remove "picture framing" effects left by belt, drum and edger machines and to achieve a professional and smooth high gloss floor finish. To ensure long lasting beauty floors must be sanded between every coat, using the finest abrasive grit available.
Screen Disc Features:
- Inter-woven polyester knit backing with silicon carbide abrasive grain on both sides
- Open mesh for load resistance
- Rinse and reuse for longer sanding life
- Tends to cut more aggressively than paper or cloth
More Info:
Directions:
Intended use:
- Refinishing wooden gym floors and racquetball courts at schools and/or sports facilities
- Preparing concrete, wood, and other floors for coating and recoating with typical sealers or finishes
Directions for use:
- Lay screen on floor
- Place a red floor pad on top to use as a drive pad
- Place a standard speed floor machine (175-300 rpm) with a the proper (balanced) pad holder on top of the pad and screen
- Operate machine as normal
| Made with highly absorbent, top quality yarn and superior construction, Industrial Looped End Wet Mops are designed for peak performance in any application. Ready for immediate use. No break in time required. The balanced blend of cotton and synthetic yarns offers excellent absorbency and strength.
- Blended yarn and looped ends minimize linting.
- Looped end covers twice the area per pass, compared to cut end mops.
- 4 ply, balanced blend of cotton and synthetic yarn for absorbency and strength.
- Outperforms and outlasts premium cut end mops two to one.
- 5" headband accommodates most mop handles.
- 1.25" headband on small size
- Economically priced
- Available Sizes: Medium, Large size
This is the best general purpose looped end wet mop for everyday cleaning. The green yarn does a great job of keeping the mop looking good, unlike that of using a pure white mop. The durable 5" headband will work with all popular wet mop handles. Small size mops have a 1.25" headband.
Need help choosing the right wet mop? Read about different mop capabilities in our Mop Selection Guide.
Packaging
Wet mop heads are packaged each in clear polyethylene bags.
Sold each or by the case of 12
Videos:
Specifications:
Wet Mop Sizes:
- Small, Equal to a 12 ounce, Headband size: 1.25 in.
- Medium, Equal to a 20 ounce, Headband size: 5 in.
- Large, Equal to a 24 ounce, Headband size: 5 in.
- The headband material is secured to the yarn with six rows of lock stitching, no less than six stitches per inch with all edges hemmed.
- Looped ends are laid side by side and secured to tailband with two rows of stitching, minimum of six stitches per inch.
- 5” headband sewn with six parallel rows of lock stitch thread.
More Info:
A Word About Color Coding:
- Small looped mops are supplied with a YELLOW headband.
- Medium looped end mops are supplied with a GREEN headband
- Large looped end mops are supplied with a RED headband
- These are commonly accepted standards used for identifying wet mops.
Directions: |
