Compare

The Blue Ice High Performance Burnishing Pad is a high-quality floor maintenance pad, made of synthetic fiber, with resins throughout and bonded to the web structure. This burnishing floor pad has been optimized for use on softer floor finishes where frequent burnishing is required and is designed for frequent burnishing with less dust, fewer burn marks, and swirl marks.

• Restores the gloss to dull-looking floors
• A super soft pad for dry burnishing
• Recommended for use on machines operating at 1,000 - 3,000 RPM
• Better durability than competitive burnish pads designed for softer floor finishes
• Remarkable gloss improvement
• Made from 100% recycled content!
• Size: 20"

Versatile, this pad works with battery, propane, and cord electric burnishers.

General Use Directions:

1. Dust mop and clean the floor surface. Use the Microfiber Fusion dust mop for effective dusting.
2. Install the Blue Ice Burnish Pad on a high-speed burnisher. It may be a corded electric, battery, or propane burnisher.
3. Burnish to a high gloss using overlapping passes.
4. Dust mop floor surface with a Microfiber Fusion dust mop.

Floor Pad Maintenance:

1. After burnishing, if the next burnishing will be with the same pad, leave the pad on the burnisher. Otherwise, remove the pad and store it.
2. Examine the pad and remove excessive dust and debris using the center "knock-out" disk.
3. Flip the pad periodically.
4. Discard the pad if the thickness decreases to the point where pad holder hooks extend completely through the pad.

Floor Pad Tip: The small circular cut-out in the center of the floor pad is for cleaning the pad. Simply remove it and brush the surface of the pad (both sides), re-insert it back in the center hole, and reuse it in the future.

More Info:

The Green Initiative used in our floor pads - Floor Pads with Enhanced Biodegradation

Our goal is to produce products that perform to the highest standards while leaving the smallest possible impact on the environment. A leader in the Jan/San industry for 45 years, Our floor pads have been made with 100% recycled fibers for well over a decade. We're now completing the cycle by introducing an innovative floor pad technology that has been specially formulated to biodegrade in a fraction of the time once discarded into a landfill, compared to conventional pads.

* When consumers see the Full Cycle label, they will know they have a quality product while reducing mankind's impact on the environment. Being good stewards of the environment is simply our corporate responsibility - and it’s what sets us apart from other manufacturers.

The Proof is in the Performance - For stripping, cleaning, polishing or burnishing, we have the pad. Only top quality materials go into our pads which result in top performance.