Compare

Typhoon Diamond Discs are a high quality long lasting resin bond diamond polishing disc used to restore and polish a variety of stone floor surfaces. The Typhoon Discs may be used under a variety of floor machines, including single disc floor machines, hand held polishers as well as multiple head machines like the Cimex. The Typhoon diamond pads perform well on a variety of hard surfaces including Marble, Terrazzo, Limestone, Travertine, leaving a flat, highly polished surface.

• Typhoon Diamonds use the latest technology - Our most popular diamond disc.
• Average life of the Typhoon diamond discs ranges from 3,000-5,000 sq ft. depending on floor condition, density (hardness of the stone) and lippage (unevenness of the tile).
• Wider range of operating RPM's from 150 to 350
• Higher quality diamonds with multiple edges are used.
• Up to 3 times more diamonds per pad than competitors discs.
• The longest lasting resin bond diamonds you can buy.

Diamond discs are available in the following grits:

• Green, 50 grit #0652001
• Black, 120 grit #0652002
• Red, 220 grit #0652003
• Yellow, 400 grit #0652004
• White, 800 grit #0652006
• Blue, 1800 grit #0652007
• Gray, 3500 grit #0652008
• Purple, 8500 grit #0652009

Packaging

Videos:

Specifications:

Additional Information:

• 3 inch diamond discs are generally used with a floor machine.
• 4 inch diamond discs are normally used with a hand held polisher, for stairs, risers and perimeter floor work.

Backing: Velcro loop backing

Thickness: 10 mm

For Use On: Marble, Travertine, Limestone, Terrazzo

Equipment Used: Floor Machine

Usage:Wet

Our resin bond pads are designed for soft stone such as marble, travertine, terrazzo and limestone.

More Info:

These diamond discs have an order lead time of 3-5 days.

Directions:

We recommend using 5 or 6 discs on a diamond disc holder, placing the discs equal distance from one another.

Microfiber Pre-Treat Cleaning Cart

This complete cleaning cart holds two 6-gallon buckets for pre-treated microfiber flat mops. The orange bucket holds the clean microfiber flat mops while the gray bucket holds the dirty/soiled mops. Simply attach the flat mop to the mop frame and clean your floor surface. In most cases, one pre-treated flat mop will clean 350-600 square feet before it's time to change the mop. In healthcare settings, the normal procedure is to use one mop per room, which eliminates the possibility of cross-contamination.

The "charge & discharge bucket" is designed especially for healthcare and classroom cleaning.

• Color-coded buckets (orange bucket for cleaning solution, gray bucket for soiled mops).
• 6-gallon buckets - each bucket holds up to 25 microfiber wet pads, generally enough for one housekeeper for one shift using one pad per room.
• 3-gallon buckets - each bucket holds up to 30 microfiber cloths or 35 wall wash & surface pads.
• Exclusive color coding - orange for cleaning solution, gray for soiled mops and cloths.
• Ergonomic - no bending or pulling.
• Molded-in filling guide: 3/4 gallon of cleaning solution for 10 mops (1 3/4 gallon to treat 25 mops).
• Water-tight lid.
• Smooth, non-porous surface helps prevent bacterial growth and cleans up easily.

The complete Pre-Treat Cleaning System includes:

• (2) 6-gallon buckets and sealing lids (Orange & Gray)
• (2) 3-gallon buckets and sealing lids (Orange & Gray)
• (1) Metal frame with 3" caster wheels (front) & (2) 9" rear transport wheels.
• (1) Waste collector bag (split compartment)
• (1) Wet floor sign holder

Order a telescoping handle, folding mop frame, and mops separately.

Directions:

• Fill the solution bucket with a proper cleaner or disinfectant detergent.
• Place microfiber mops face down in the clean bucket (orange).
• Pour solution back and forth over mops.
• Place the lid on the bucket, making sure the seal snaps in place on all four corners.
• Flip the bucket over and let it sit for a minimum of 10 minutes.
• Place the bucket on the trolley along with the dirty bucket.
• Collapse the frame by pressing the button, line up edges of the frame in front of the mop, and press firmly to "snap" the frame into the mop.
• Clean the floor.
• Hold the mop & frame above waist level, push the button on the frame to release the mop into the dirty bucket, and pull the frame away.

*On average, a pre-treated flat mop can clean between 500-750 square feet of flooring before needing to be re-treated or placed in the discharge bucket. For healthcare facilities, it is recommended to use one mop per room to greatly reduce the chance of cross-contamination.