Compare

Lowest cost per square foot of all our marble and stone diamonds. - Available in 50, 120, 220, 400, 800, 1800, 3500 grit, these discs will completely restore your floor when used in succession. They smooth out a rough texture terrazzo and marble floors. These discs are used only on floors that are "pitted" or present a very "rough" texture. A velcro style back attaches directly to the face of the velcro disc holder or the male-to-male velcro kit.

• Available in grits from: 50-3500 grit.
• Large overall footprint allows for 3 diamonds to do the work of 5 x 3" while maintaining good machine balance.
• Tab provides easy removal from drive plate and allows "hang to dry" to help prevent mildew and increase life.
• A velcro style back attaches directly to the face of the diamond disc holder or the male-to-male velcro kit.
• Recommended for use on Terrazzo, Marble, Travertine and Limestone floors.
• The Scratch Removal Discs are designed to be used with water, do not run on a dry floor.
• Not for use on concrete floors.

Packaging

Packaging and Color Chart:

SRD'S are packed (3) per set

Average yield per set of of SRD's range from 3,000 - 5,000 square feet per set of 3 discs (depending on type of stone, floor condition and lippage).

Size: 2" x 6"

Available Grits:

Green, 50 grit

Black, 120 grit

Red, 220 grit

Yellow, 400 grit

White, 800 grit

Blue, 1800 grit

Gray, 3500 grit

Videos:

Specifications:

The SRD's are Designed for Performance

• Large overall footprint allows for 3 diamonds to do the work of 5 x 3” pads, while maintaining optimum machine balance.
• Floor contact is increased by 50%.
• The total labor savings is in excess of 40%.
• 66% of surface area moves in top 5% of pad driver speed versus less than 20% of conventional diamonds.
• Oversized design provides exceptional life.
• Segment height is 10 mm and weight is a full 2.2 oz.- almost double most other diamonds.
• Largest area's dimensions are 5.75" x 2.5"

The Velcro Tab - So Simple, So Effective

• Tab provides easy removal from drive plate and allows "hang to dry" to help prevent mildew and increase life of the hook and loop backing.
• Standard hook and loop back for ease of attachment and removal from driver.
• Male hook and loop adapter available to allow attachment to white floor pad for added flexibility.

More Info:

Directions:

Resurfacing and general scratch removal procedure:

Step 1: Resurface with Scratch Removal Discs

a) Thoroughly strip the floor to remove surface coating.

b) Hone the surface with Scratch Removal Discs and water.

Honing process time:

• Terrazzo and marble: 30 sec. per sq. ft.
• Granite: 1 min. per sq. ft.

c) Vacuum the slurry and rinse with "Neutral Stone Cleaner"

* Complete this step, then proceed to polishing with Wet Polish Powder

** The SRD's will not perform well if your floor has issues with lippage.

Electroplated diamond screens for concrete or terrazzo polishing and restoration. Provides outstanding results on polished concrete, natural stone and terrazzo floors. A versatile and efficient solution for floor restoration.

• 220 grit (heavy scratch removal)
• Diamonds are exposed on screens and don't require any break-in
• Available in popular sizes
• Employs a unique electroplated technology
• No special equipment required
• Use with your existing floor maintenance equipment for low start-up costs
• Available in sizes from 13" - 20"
• 2 screen discs per set

Use in-house maintenance crews or existing maintenance contractors for light restoration work, without the need for special equipment or training.

• Significantly longer life, up to three times longer life versus other diamond restoration systems.

220 Grit Heavy Scratch Removal Screen

This 220 grit screen when used on concrete or terrazzo will remove heavy surface scratches, orange peel (terrazzo) and imperfections in preparation for the next screen used in the process, 400 grit. If a higher level of gloss is preferred we recommend implementing the Twister pad system or the 400 grit Orange DiamaScreen as your next step.

Problem Solver

The DiamaScreen Concrete & Terrazzo restoration series of screens is the problem solver for the stone floor renovation industry. This system gives new life to damaged and heavily worn natural stone, terrazzo and concrete floors. Easy to use and environmentally friendly, the DiamaScreen gives you an opportunity to remove stains, scratches and "orange peel" using ordinary floor machines and water.

Packaging

DiamaScreens are packed 2 per box

Videos:

Specifications:

DiamaScreen Specifications

Grit: 220

Color: Red

Thickness: .04 (1 mm)

Material: Electroplated screen

Usage: Heavy scratch removal

Use: Wet use with water

Center Hole: 3.15 in.

Sizes: 13, 14, 15, 16, 17, 20 inch diameter

Pack: 2 per box

More Info:

The DiamaScreen system requires three items to complete the set

• 1 - Pad holder
• 1 - Standard floor pad - Red (match the size of the screen you're using)
• 1 - Center lock pad holder
• 1 - Safety ring (included)

The screens are sold in pairs and include (1) pad safety ring (centering ring), available in the following sizes: 13, 14, 15, 16, 17, 20 inch diameter.

How much surface area can I cover with a DiamaScreen?

DiamaScreens can cover up to 30,000 square feet using a standard 350 rpm floor machine. Bear in mind, this assumes making one pass on a floor. If the floor requires 3 passes to achieve the desired results, your coverage will be 10,000 square feet per screen or 20,000 per case of 2 screens.

Directions:

DiamaScreens are available in 3 grits:

• Red 220 grit (most aggressive)
• Orange 400 grit (moderate)
• Gold 600 grit (least aggressive)

Heavily scratched floors may require starting with 400 or 220 grit screens. Use the 600 grit for producing a satin smooth surface. DiamaScreens are designed for use with water (not for dry use).