Compare

The Easy Gloss System is a floor finish applicator designed to make floor finish coating faster and easier, while eliminating waste. The system features a lightweight applicator, convenient backpack and a microfiber applicator pad.

• Lightweight durable handle with finger tip dispense control.
• Padded backpack with adjustable straps for personal fit.
• Easy mounting applicator pad system.
• 1.5 gallon floor finish pouch included

Easy Gloss refillable 1.5 gallon bags are sturdy, reusable, and easy to fill and install. Bags can be filled with virtually any floor care chemical. Max liquid volume is 1.5 gallons. Under normal use conditions the pouch can be filled and reused up to 30 times.

*Not for use with oil base floor/wood finishes.

Easy Gloss Applicator Features

• Heavy Duty Canvas Backpack
• Ergonomically designed with padded, shoulder straps that are adjustable for desired fit

Refillable Floor Finish Bags

• Easy to fill and install
• Bags can be filled with virtually any non-acid floor care chemical
• 1.5 gallon capacity

Anodized Aluminum Handle - 56.5 inch

• Corrosion and shock resistant
• Lightweight

Swivel Trigger Operated Fluid Dispenser

• Allows quick and easy fluid dispensing
• Continuous flow when the valve is depressed
• Dual outlet dispenses fluid at a 90 degree angle - eliminates liquid collecting on the mop frame
• Swivel trigger moves with natural movement of operator making it more ergonomic.

Unique Frame Design

The 16" Cling-On molded flat mop frame with quick connector has molded-in spikes - the mop pad clings to the frame (no hook and loop strips) - and holds your mop pad firmly in place. Addresses ongoing nuisance issue of having to replace velcro strips that accumulate fiber and causes the frame to lose its grip on the mop.

Packaging

Easy Gloss Floor Finish Applicator Kit Includes:

• 56.5" Applicator handle
• 16" Nylon applicator pad holder - New
• Padded backpack with adjustable straps
• 18" applicator pad
• 7' supply tubing with pouch connector
• One refillable pouch (1.5 gallon capacity)

Videos:

Specifications:

More Info:

The 5' clean out fitting is a great option when a pressurized cleaning is necessary. Fits most standard faucets in commercial janitor sinks

• *Clean out fitting is an optional accessory
• Part #: 0354561

Specially designed filling station allows use of most water base floor finishes and many other cleaning chemicals such as neutral, general purpose, and disinfectant cleaners.

Refill stand kit is an optional accessory

The Refill Station Stand can be affixed to most flat surfaces (optional)

Using the funnel fill makes it easy to use in almost every cleaning environment.

• Simple funnel fill system
• Part #: 0354555

Directions:

Easy Gloss Floor Finish Applicator System

1. Prepare floor surface for coating.
2. Using the trigger at the top of the handle, depress to dispense a 4" puddle of floor finish onto the floor surface.
3. Applicator system will utilize the same application approach as conventional floor finish mop. Move applicator pad into the "puddle" to load the pad for initial use.
4. While moving applicator to new floor areas, dispense finish periodically and use U-shaped motion (section applications) as with conventional floor coating procedures.
5. Move at an even, uniform pace. Keep floor finish applicator pad uniformly wet with floor finish for proper coverage from one section to another.

Genuine Lambswool Applicator Pads are the professional floor specialists choice for a smooth even finish. From storefronts to gymnasiums, large areas and small, select from a full range of sizes.

This 100% natural lambswool pad offers efficiency and practicality. It can be washed and reused again and again and fits a standard threaded handle.

• 100% chrome tanned back
• Threaded handle not included (please order separately)

Ideal for the application of most oil based finishes and sealers.

Packaging

Videos:

Specifications:

Applicator Sizes:

10"- Part #: 0281010

12"- Part #: 0281212

16"- Part #: 0281616

Applicator Refill Sizes:

10"- Part #: 0280010

12"- Part #: 0280012

16"- Part #: 0280016

More Info:

Directions:

How to prep a Lambswool Pad prior to use:

1. Immerse the lambswool pad in a paint pan filled with mineral spirits for 5 to 10 minutes. This allows the lambswool pad to be more absorbent and help it spread urethane evenly.
2. Remove the lambswool pad from the mineral spirits and wring it out, allow the pad to remain damp but not soaked.
3. Install the lambswool pad on the applicator head by loosening the two wing nuts that hold the two pieces of the head together.
4. Wrap the lambswool pad around the bottom part of the head so that the wool is facing out. Make sure there is an even amount of the pad overlapping the top of the head on both sides.
5. Place the upper wood block onto the bottom block, sandwiching the lambswool pad between the two parts. Tighten the wing nuts to secure the pad in place.

How to apply finish with a Lambswool Applicator:

1. Open the container of oil base finish and pour it into a paint tray.
2. Dip the bottom of the lambswool pad into the finish. Drag the pad lightly across the edge of the paint tray to remove excess finish from the pad.
3. Place the lambswool pad on the surface of the wood and begin applying the urethane in long, even strokes going with the grain of the wood. When the finish becomes uneven, dip the pad back into the tray and re-wet.
4. Continue applying the finish until the entire surface of the wood is covered.