Compare

Typhoon Diamond Discs are a high quality long lasting resin bond diamond polishing disc used to restore and polish a variety of stone floor surfaces. The Typhoon Discs may be used under a variety of floor machines, including single disc floor machines, hand held polishers as well as multiple head machines like the Cimex. The Typhoon diamond pads perform well on a variety of hard surfaces including Marble, Terrazzo, Limestone, Travertine, leaving a flat, highly polished surface.

• Typhoon Diamonds use the latest technology - Our most popular diamond disc.
• Average life of the Typhoon diamond discs ranges from 3,000-5,000 sq ft. depending on floor condition, density (hardness of the stone) and lippage (unevenness of the tile).
• Wider range of operating RPM's from 150 to 350
• Higher quality diamonds with multiple edges are used.
• Up to 3 times more diamonds per pad than competitors discs.
• The longest lasting resin bond diamonds you can buy.

Diamond discs are available in the following grits:

• Green, 50 grit #0652001
• Black, 120 grit #0652002
• Red, 220 grit #0652003
• Yellow, 400 grit #0652004
• White, 800 grit #0652006
• Blue, 1800 grit #0652007
• Gray, 3500 grit #0652008
• Purple, 8500 grit #0652009

Packaging

Videos:

Specifications:

Additional Information:

• 3 inch diamond discs are generally used with a floor machine.
• 4 inch diamond discs are normally used with a hand held polisher, for stairs, risers and perimeter floor work.

Backing: Velcro loop backing

Thickness: 10 mm

For Use On: Marble, Travertine, Limestone, Terrazzo

Equipment Used: Floor Machine

Usage:Wet

Our resin bond pads are designed for soft stone such as marble, travertine, terrazzo and limestone.

More Info:

These diamond discs have an order lead time of 3-5 days.

Directions:

We recommend using 5 or 6 discs on a diamond disc holder, placing the discs equal distance from one another.

Lowest cost per square foot of all our marble and stone diamonds. - Available in 50, 120, 220, 400, 800, 1800, 3500 grit, these discs will completely restore your floor when used in succession. They smooth out a rough texture terrazzo and marble floors. These discs are used only on floors that are "pitted" or present a very "rough" texture. A velcro style back attaches directly to the face of the velcro disc holder or the male-to-male velcro kit.

• Available in grits from: 50-3500 grit.
• Large overall footprint allows for 3 diamonds to do the work of 5 x 3" while maintaining good machine balance.
• Tab provides easy removal from drive plate and allows "hang to dry" to help prevent mildew and increase life.
• A velcro style back attaches directly to the face of the diamond disc holder or the male-to-male velcro kit.
• Recommended for use on Terrazzo, Marble, Travertine and Limestone floors.
• The Scratch Removal Discs are designed to be used with water, do not run on a dry floor.
• Not for use on concrete floors.

Packaging

Packaging and Color Chart:

SRD'S are packed (3) per set

Average yield per set of of SRD's range from 3,000 - 5,000 square feet per set of 3 discs (depending on type of stone, floor condition and lippage).

Size: 2" x 6"

Available Grits:

Green, 50 grit

Black, 120 grit

Red, 220 grit

Yellow, 400 grit

White, 800 grit

Blue, 1800 grit

Gray, 3500 grit

Videos:

Specifications:

The SRD's are Designed for Performance

• Large overall footprint allows for 3 diamonds to do the work of 5 x 3” pads, while maintaining optimum machine balance.
• Floor contact is increased by 50%.
• The total labor savings is in excess of 40%.
• 66% of surface area moves in top 5% of pad driver speed versus less than 20% of conventional diamonds.
• Oversized design provides exceptional life.
• Segment height is 10 mm and weight is a full 2.2 oz.- almost double most other diamonds.
• Largest area's dimensions are 5.75" x 2.5"

The Velcro Tab - So Simple, So Effective

• Tab provides easy removal from drive plate and allows "hang to dry" to help prevent mildew and increase life of the hook and loop backing.
• Standard hook and loop back for ease of attachment and removal from driver.
• Male hook and loop adapter available to allow attachment to white floor pad for added flexibility.

More Info:

Directions:

Resurfacing and general scratch removal procedure:

Step 1: Resurface with Scratch Removal Discs

a) Thoroughly strip the floor to remove surface coating.

b) Hone the surface with Scratch Removal Discs and water.

Honing process time:

• Terrazzo and marble: 30 sec. per sq. ft.
• Granite: 1 min. per sq. ft.

c) Vacuum the slurry and rinse with "Neutral Stone Cleaner"

* Complete this step, then proceed to polishing with Wet Polish Powder

** The SRD's will not perform well if your floor has issues with lippage.