Compare

The lightweight solid polyester vest offers economy and value to help you keep costs down and stay compliant. ANSI Class 2 certified with silver reflective strips offer compliant protection at an economical price. Excellent choice for extreme work environments, like asphalt paving, that greatly reduce the useful life of a vest, or protection for short-term labor.

This vest features:

• Hook & loop front closure
• 2 inch silver reflective stripes
• 2 outer and 1 inner pocket
• Florescent Lime color

Applications for these safety vests:

Airport , Baggage Handling, Carpentry, Construction, Demolition, Emergency, First responder, Flagman, Landscaping, Police, Railroad, Sanitation, Security, Surveyor, TSA.

Material Features

• ANSI/ISEA 107-2015 Class 2, Type R compliant
• Hook and Loop front closure
• 2 inch silver reflective stripes
• 2 outer and 1 inner pocket
• Value series option, solid material

Available in popular sizes:

• Large: CRW VCL2SLL
• X-Large: CRW VCL2SLXL
• 2X Large: CRW VCL2SLXL2
• 3X Large: RVR VCL2SLX3
• 4X Large: RVR VCL2SLX4

Packaging

Videos:

Specifications:

Safety Vest Specifications

Part #: VCL2SL

Series: Luminator

Class: 2

Category: Safety Vest

Material: Polyester

Color: Fluorescent Lime

Type: R- Roadway and Temporary Traffic Control Zones

Hi Vis:Yes

Front Closure: Hook and Loop

Reflective Stripe: Silver

Reflective Stripe Width: 2 in.

Binding Color: Black

Fabric Type: Solid

ANSI 107- 2015: Yes

More Info:

Directions:

Genuine Lambswool Applicator Pads are the professional floor specialists choice for a smooth even finish. From storefronts to gymnasiums, large areas and small, select from a full range of sizes.

This 100% natural lambswool pad offers efficiency and practicality. It can be washed and reused again and again and fits a standard threaded handle.

• 100% chrome tanned back
• Threaded handle not included (please order separately)

Ideal for the application of most oil based finishes and sealers.

Packaging

Videos:

Specifications:

Applicator Sizes:

10"- Part #: 0281010

12"- Part #: 0281212

16"- Part #: 0281616

Applicator Refill Sizes:

10"- Part #: 0280010

12"- Part #: 0280012

16"- Part #: 0280016

More Info:

Directions:

How to prep a Lambswool Pad prior to use:

1. Immerse the lambswool pad in a paint pan filled with mineral spirits for 5 to 10 minutes. This allows the lambswool pad to be more absorbent and help it spread urethane evenly.
2. Remove the lambswool pad from the mineral spirits and wring it out, allow the pad to remain damp but not soaked.
3. Install the lambswool pad on the applicator head by loosening the two wing nuts that hold the two pieces of the head together.
4. Wrap the lambswool pad around the bottom part of the head so that the wool is facing out. Make sure there is an even amount of the pad overlapping the top of the head on both sides.
5. Place the upper wood block onto the bottom block, sandwiching the lambswool pad between the two parts. Tighten the wing nuts to secure the pad in place.

How to apply finish with a Lambswool Applicator:

1. Open the container of oil base finish and pour it into a paint tray.
2. Dip the bottom of the lambswool pad into the finish. Drag the pad lightly across the edge of the paint tray to remove excess finish from the pad.
3. Place the lambswool pad on the surface of the wood and begin applying the urethane in long, even strokes going with the grain of the wood. When the finish becomes uneven, dip the pad back into the tray and re-wet.
4. Continue applying the finish until the entire surface of the wood is covered.