Neutral pH Carpet Cleaner – Fiber All Extraction Cleaner

Description

Fiber All Carpet Cleaning Detergent is now formulated to meet the stringent Carpet & Rug Institute’s Seal of Approval for overall cleaning effectiveness, rate of resoiling, pH, surface texture change, and colorfastness.

Recommended for Use:

Steam or hot water carpet extractors on all types of carpeting (Including Stain Resistant), upholstery, and rugs.

This more environmentally responsible, anti-soil, multi-purpose carpet cleaner concentrate is a pre-treat and extraction cleaner.

• Powerful, cleaning agents penetrates and lifts soils.

Fiber All Plus is nontoxic, non-corrosive, contains no butyl, EDTA, phosphates, optical brighteners, or volatile organic compounds (VOCs) as defined by state and Federal regulations.

• Powerful – Surfactant blend unlocks soil and dirt for easy removal.
• Low residue – Rinses freely, so carpets stay cleaner, longer.
• Economical – highly concentrated.
• Highly concentrated emulsifier for use with hot & cold water extraction or steam cleaning machines.
• Carpet & Rug Institute Seal of Approval and EcoLogo Certified.

Packaging

Fiber all is packaged in one gallon containers sold each or by the case of 4

Videos:

Specifications:

Fiber-All Plus  Extraction Cleaner Specifications

Color: Clear

Odor: Pleascent fresh

pH: 9.0 (concentrate)

Viscosity: Water thin

Foam: Low

Phosphates: None

Base: Biodegradable detergents

Solubility: Complete with water

Soil Retardency: Excellent

Biodegradability: Complete

Stability: 2 years

More Info:

Carpet & Rug Institute Seal of Approval
This Carpet & Rug Institute tested and certified cleaner effectively removes soil without any damage to the carpet. The CRI Seal of Approval is awarded to carpet cleaning products that pass stringent tests administered by an independent, accredited institute.

EcoLogo Certified
EcoLogo is North America’s largest, most respected environmental standard and certification mark. EcoLogo provides customers with assurance that the products and services bearing the logo meet stringent standards of environmental leadership.

Directions:

Directions For Use

Vacuum carpet thoroughly. Pre-test carpet for colorfastness in an out-of-sight area.

Extraction: For light soil: Dilute 1:128 (1 ounce per gallon of water). For heavy soil: Dilute 1:64 (2 ounces per gallon). For best results, follow with Carpet Rinse Plus to neutralize and condition the carpet.

Pre-Spray: For light soil: Dilute 1:128 (1 ounce per gallon of water). For heavy soil: Dilute 1:64 (2 ounces per gallon). Spray diluted product onto the carpet. Allow 3-5 minutes dwell time. Rinse with Carpet Rinse Plus to remove soil, neutralize and condition the carpet.

**Important notes: Follow the cleaning procedures specified by manufacturer of the cleaning equipment. Avoid overwetting the carpet. Add Liquid Defoamer to the recovery tank as necessary. After using this product, set the carpet pile and protect the carpet from furniture legs and bases while drying.

**Do not overwet carpet**

To thoroughly clean heavily soiled carpets, pre-spray with Pre-Treat Plus cleaner. Safe to use on new stain resistant carpet fibers.