Compare

This extra fine white floor pad has been designed for polishing and cleaning delicate and highly-polished floors. Use dry or with restorative chemicals, to produce a wet look gloss to newly finished floors. A very soft non- abrasive dry polishing floor pad from low speed floor machine to high speed burnishers. This pad will polish to a high luster.

• The White Polishing Floor Pad is made of polyester fibers in a dense textured, non-woven pattern, bonded with a sturdy adhesive.
• The pad is used for spray cleaning or dry buffing soft finishes using a rotary machine (175-800 rpm). It is also used for light cleaning under an automatic scrubber.
• This extra fine pad has been designed for polishing clean, dry floors.
• White polishing pads are a perfect match when used to polish marble floors.
• Made from 100% recycled content

These white pads are equal to 3M 4100 super polish pads

Packaging

White floor pads are sold individually or in a case of 5.

Videos:

Specifications:

Available sizes:

• 13" - 0270113
• 14" - 0270114
• 15" - 0270115
• 16" - 0270116
• 17" - 0270117
• 19" - 0270119
• 20" - 0270120

More Info:

Recycled Content of Our Floor Pads (PDF)

Green Initiative used in our floor pads - Floor Pads with Enhanced Biodegradation
Our goal is to create products that perform to the highest standards while leaving the smallest possible impact on the environment. As s leader in the Jan/San industry for 45 years, our floor pads are made with 100% recycled fibers for well over a decade. We're now completing the cycle by introducing an innovative floor pad technology that has been specially formulated to biodegrade in a fraction of the time once discarded into a landfill, compared to conventional pads.

* When consumers see the Full Cycle label, they will know they have a quality product while reducing mankind's impact on the environment. Being good stewards of the environment is simply our corporate responsibility - and it’s what sets us apart from other manufacturers.

The Proof is in the Performance - For stripping, cleaning, polishing or burnishing, we have the pad. Only top quality materials go into our pads which result in top performance.

Directions:

General Use Directions:

1. Dust mop and clean floor surface. The Microfiber Fusion dust mop may be effectively used for dusting floor. Note: Buff only on a clean floor.
2. Install the White Polish Pad on a floor machine
3. Buff to a high gloss using overlapping passes.
4. Dust mop floor surface with a Microfiber Fusion dust mop may be effectively used for dusting floor.

Floor Pad Maintenance:

1. After buffing, if next buffing will be with same pad, leave pad on machine. Otherwise, remove pad and store.
2. Examine pad. Remove excessive dust and debris with a the center *"knock out"
3. Flip pad periodically.
4. Discard pad if thickness decreases to point where pad holder hooks extend completely through pad.

Floor Pad Tip:

Did you ever wonder what that small circular cut-out in the center of the floor pad is?

This little circular disk is used for cleaning the floor pad. Simply remove it and brush the entire surface of the floor pad (both sides) and re-insert it back in the center hole and re-use in the future.

• Ideal for use on organic odors and stains from urine, vomit, feces, blood, grease, wine, drains, grease traps, and sewage, etc.
• Specially selected blend of High Activity Bacteria quickly digest a broad spectrum of organic waste.
• High bacteria count, over 200 billion per gallon for highest efficiency.
• Powerful, having the ability to double in quantity every 20-30 minutes to work better and faster for long lasting odor control.
• A unique manufacturing process places the High Activity Bacteria into a dormant state to guarantee extended shelf life and maximum enzymatic activity when used.
• Enzymes immediately digest waste on contact.
• Preventive maintenance for drain lines and grease traps.

Packaging

• 32 ounce bottle sold individually or 12 bottles per case
• 1 gallon containers or 4 gallons per case

Videos:

Specifications:

More Info:

Directions:

• Carpet, Fabric, Odor and Stain Removal: Effective on pet soiled areas, milk, vomit, urine, feces, blood, coffee, wine, soda, etc. Remove as much solid waste as possible. Dilute 10 ounces of Liquid Enzyme per gallon of water - before using test a small area of fabric for color stability. Saturate the soiled area with diluted solution.
• To digest odors in carpets, upholstery: Dilute at 8 ounces per gallon. Test fibers for color-fastness If color fast, use solution to clean soiled area. After cleaning, spray with full strength Rinse with water. Blot up or pick up with wet vacuum.
• Grease Trap Applications: For grease traps less than 20 cubic feet capacity add 4-5 ounces. For grease traps larger than 20 cubic feet, add 8 - 10 ounces. Use Liquid Enzyme daily by pouring in a sink or pipeline closest to the trap. This should be done regularly at night or when the traps are used the least. Pour down one cup of warm water.
• Septic Tanks: Add 1 pint per 25 cubic feet of capacity for initial treatment. Pour directly into toilet and flush. If septic tank has become clogged and odorous, add 1 gallon of Liquid Enzyme directly to the tank through the manhole
• Porta - Toilets and Outhouses: Add 1 quart to holding tank.

The Remover Ultra High-Speed Burnishing Pad with a special binder formulation effectively removes black marks and restores gloss. Removes black marks, heel marks, floor scuffs, and returns gloss to your floor in fewer passes than other pads while producing less dust. Ideal for harder finishes and high-traffic areas. Excellent durability and minimal floor finish removal.

The pad is used on cord electric, battery, or propane-powered floor machines. Also designed for use on other finishes resistant to degradation from burnishing.

• Equipment type: Ultra high-speed machines (1,500 - 3,000 RPM)
• Best choice for scuff and mark removal while producing excellent gloss on harder floor finishes
• Great for retail, healthcare, and other facilities that want to minimize the dust generated by burnishing operations
• Made from 100% recycled content

General Use Directions:

1. Dust mop and clean the floor surface. The Microfiber Fusion dust mop may be effectively used for dusting floors.
2. **Note:** Burnish only on a clean floor.
3. Install the Eraser-type pad on a high-speed burnisher. It may be a corded electric, battery, or propane burnisher.
4. Burnish to a high gloss using overlapping passes.
5. Dust mop floor surface with a Microfiber Fusion dust mop.

Floor Pad Maintenance:

1. After burnishing, if the next burnishing will be with the same pad, leave the pad on the burnisher. Otherwise, remove the pad and store it.
2. Examine the pad and remove excessive dust and debris using the center "knock-out" disk.
3. Flip the pad periodically.
4. Discard the pad if the thickness decreases to the point where pad holder hooks extend completely through the pad.

Floor Pad Tip: The small circular cut-out in the center of the floor pad is for cleaning the pad. Simply remove it and brush the surface of the pad (both sides), re-insert it back in the center hole, and reuse it in the future.

More Info:

The Green Initiative used in our floor pads - Floor Pads with Enhanced Biodegradation

Our goal is to produce products that perform to the highest standards while leaving the smallest possible impact on the environment. A leader in the Jan/San industry for 45 years, Our floor pads are made with 100% recycled fibers for well over a decade. We're now completing the cycle by introducing an innovative floor pad technology that has been specially formulated to biodegrade in a fraction of the time once discarded into a landfill, compared to conventional pads.

* When consumers see the Full Cycle label, they will know they have a quality product while reducing mankind's impact on the environment. Being good stewards of the environment is simply our corporate responsibility - and it's what sets us apart from other manufacturers.

The Proof is in the Performance - For stripping, cleaning, polishing or burnishing, we have the pad. Only top quality materials go into our pads which result in top performance.