| |
Cleaning Equipment |
 |
|
|
|
|
|
|
|
|
|
| |
Large Area Propane Buffer |
| Dual Head Burnisher This 39”
propane powered burnisher, reduces
buffing time by 33% allowing 45,000 sq ft of production in an hour.
While its polishing/burnishing path is 39” it fits through a 36”
door thanks to its unique head design. This unit features oil filled
bearings that require no maintenance (drive shaft) and two vacuum
ports. Attach your portable vacuum to the vacuum ports for concrete
polishing to collect any dust. No need for high voltage electric
cords.
Run time is 5 to 6 hours per propane cylinder. Emissions
protected by three-way catalytic muffler. Options include kill
switch and emissions shut down system.
|
 |
Heavy duty dual burnisher
- Two 20” 360° floating swivel spin-on metal
pad drivers
- 39” refresh unit fits through 36” door
- Robin 653 cc propane engine
- Oil filled bearings require no maintenance
(drive shaft)
- Two vacuum ports
- EPA & CARB approved
- Oil filled bearings require no maintenance
- Adjustable handle
- 12 volt starting system
|
|
All machines come standard with Robin 22hp, 653 cc
propane engine, service alert (hour) meter, two 20" pad
holders,
adjustable handle, aluminum safety-fill fuel cylinder with overfill
prevention device (OPD) (UL and DOT approved), and two year limited
warranty. *All engines exceed Environmental
Protection Agency (EPA) and California Air Resource Board (CARB)
regulations for exhaust emissions.
|
| |
|
|
|
| Order #1509040 |
| 40" Propane Floor Polisher
|
|
Shipping
rates vary from $150.00 - $225.00
depending on final destination.
Residential deliveries may incur an
additional charge of $25.00 - $45.00 |
|
Call 800-836-0862 to order |
|
|
| |
 |
Talon 3900 Propane Floor Machine
Specifications |
All machines come standard with service alert (hour)
meter,
360° floating swivel pad drivers, adjustable handle, steel
safety-fill fuel cylinder
with overfill prevention device (OPD) (UL and DOT approved), and two year
warranty. |
| Chassis Construction: |
Aluminum frame
Adjustable handle
Right side machine offset body
|
| Weight: |
350 lbs. |
| Dimensions: |
59" L x 42" W x 42" H |
| Pad Diameter: |
4" (2 x 20" diameter pads are used) |
| Pad Driver Description: |
360 degree floating |
| Pad pressure: |
38 - 42 lbs. |
| Pad speed: |
1800 RPM |
| Engine Type: |
22 HP Robin Subaru |
| Fuel System: |
Safety propane fuel system |
| Oil Safety System: |
Oil alert |
| Starter: |
On-board battery star |
| Productivity: |
45,000 sq. ft. / hr. |
| Standard Accessories: |
Oil Alert, Hour Meter, Propane Tank, 12 battery |
| Warranty: |
Two years |
|
|
|
|
|
