| |
Cleaning Equipment |
 |
|
|
|
|
|
|
|
|
|
|
|
Floor Finish Applicator |
|
E-Z WAY Floor Finish Applicator
is the most efficient
and economical system used to apply water-based floor finishes, effortlessly.
This labor saving finish applicator is designed specifically where
professional quality results are required. The
high speed method to beautiful floors. |
- EZ Way is
Portable, Lightweight and is
easily maneuvered
- Weighs only 8 pounds (dry weight)
- Refinish floors 4 times faster than conventional methods
- Eliminates baseboard splash
- Apply floor finish at over 35,000 square feet per hour
- Applies water-based floor finishes as well as gym floor finishes
- 24" coverage
- 2.5 gallon capacity tank
- Easy to use
- Easy to clean
- Makes mop bucket / wringers obsolete
|
|
|
|
|
|
EZ Way K-450
E-Z Way K-450 for 40-50
percent solid VOC oil based finishes. Apply 40-50% solids directly to
wood floors.
Double Valve Delivery - adjust flow to where you need it.
Quick and easy cleanup (no tubes or manifold). |
 |
|
|
|
|
EZ Way K-200
E-Z Way
K-200 is designed to apply water
based wood floor finishes and oil based finishes up to 35 percent solid.
Coat as much as 35,000 square feet per hour
Applies water-based floor & gym finishes
24" coverage 2.5 gallon capacity tank
Clean up with water Eliminates contaminated finish |
 |
| Order #0621000 |
| K-100 Applicator
|
|
| Order #0622000 |
| K-200 Applicator
|
|
| Order #0624500 |
|
K-450 Applicator
|
|
| Order #0621002 |
| Applicator Pad (white)
|
|
|
| Order #0621001 |
| Lambswool Pad
|
|
|
The applicator pad (white) is made of rayon and
polyester fiber (cut end). This head is suitable for water viscous finishes
i.e. floor finishes and floor restorers. |
|
The lambswool pad is for oil base and water base wood floor
finishes. This head applies a thicker, heavier coat than the white pad. |
 |
|
 |
|
| Which one to choose? |
| The K-100 is for water base floor finishes used to coat VCT,
vinyl, terrazzo, marble and stone floors. If you are using the K-100 applicator the ONLY refill you want is the "White Applicator Pad" not the "Lambswool Pad". |
|
The K-200 is primarily for water base wood floor finishes due the higher
viscosity in water base wood finishes.
The only difference between the K-100 & the K-200 is the size of holes in the
manifold tube. The K-200 will dispense more material than the K-100. The K-200 is a more
applicator than the K-100. If you purchase a K-200 and notice too much
material is dispensed
through the manifold, simply tape the two end holes to reduce the amount. |
|
The K-450 is specifically for high solid VOC complaint wood floor finishes. The K-450 does
not have a manifold like the K-100 & K-220. Rather, it dispenses material directly to the floor. |
|
The applicator pad (white) is made of rayon and
polyester fiber (cut end). This head is suitable for water viscous finishes
i.e. floor finishes and floor restorers. |
|
The lambswool pad is for oil base and water base wood floor
finishes. This head applies a thicker, heavier coat than the white pad. |
|
|
|
|
|
