|
Easy Gloss Floor Finish Applicator System
1. Prepare floor surface for coating.
2. Using the trigger at the top of
the handle, depress to dispense a 4" puddle of
floor finish onto the floor surface.
3. Applicator system will utilize the same application
approach as conventional floor finish mop. Move applicator pad into the
"puddle" to load the pad for initial use.
4. While moving applicator to new
floor areas, dispense finish periodically and use U-shaped motion (section
applications) as with conventional floor coating procedures.
5. Move at an even, uniform pace. Keep floor finish
applicator pad uniformly wet with floor finish for proper coverage
from one section to another. |
