Powerful, non-fuming acid REJUVENATOR GROUT RESTORER that makes ceramic tile & grout look like new. Removes hard-water scale, soap scum, grout haze and rust.

Rejuvenator tile and grout cleaner will restore the look and beauty to grouted floors.

• Fast acting
• Easy to use
• Concentrated
• Economical

For use on:

• Ceramic tile
• Porcelain tile
• Sanded grout
• Quarry tile

Floor must be clean of all loose dirt and debris. Old acrylic floor finish and heavy dirt build up should be removed with conventional stripper, degreaser, or general purpose cleaner.

Tile & Grout Restorer

Directions:

1. Apply diluted REJUVENATOR GROUT RESTORER to the floor
with a clean mop. Leave floor wet for five minutes.
2. Agitate cleaning solution using a low speed floor machine equipped with a nylon brush. Solution can also be agitated by hand with a desk brush.
3. Recover dirty solution with a wet dry vac.
4. Rinse floor with clean water using a clean mop and wet dry vac.
5. Allow floor to dry. (8 to 24 hours).

HEAVY DUTY: 1 part to 1 part water
MEDIUM DUTY: 1 part to 4 parts water
LIGHT DUTY: 1 part to 10 parts water Apply Impregnator H2O to non-glazed surfaces immediately they are clean and dry.